Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : < ... 16 17 18 19 20 21 22 23 24 > Now viewing page 22 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Pimp My Rod and Reel -- Repair and Service |
Message Subject: Pimp My Rod and Reel -- Repair and Service | |||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | TCESOX - 1/17/2018 2:38 PM Just want to double check, before sending you some reels this week, if I would still be able to pick up at the Minnesota Muskie Expo. Thanks Yes just send Note with reels I’ll text you a couple days before the show with Total cost | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Still time to get me reels for the Milwaukee Musky Expo Feb 9 /11 Wausau March 2 /4 Minneapolis March 9 / 11 Sent note with reels Then pickup your Reels at these Musky Expo’s Still only $25.00 a Reel to Detail, Tune, Relube Your reel will taken completely apart and parts inspected, then will Be Cleaned in a Heated Ultra Sonic Cleaner. All Bearings Tuned Lubed Or Greased using Polar Bonding Lube. Plus all contact points are Polished. All worn out parts will be replaced. All drags upgraded to Carbontex. All plastic bushings replaced with Bearings. $25.00 Plus Parts !!!! | ||
allegheny river kid |
| ||
Posts: 463 Location: Sw Pennsylvania | Is it still $25 to just lube and clean a 400 te shimano? | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | allegheny river kid - 1/20/2018 6:34 PM Is it still $25 to just lube and clean a 400 te shimano? Yes read post above !!!!! | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | I may be at the Southern Musky Expo this Saturday Jan 27 Anyone got reels to drop off ?? I’ll be there just for a short time on Saturday only. I’ll also be at the Milwaukee Show February 9 / 11 Working at the ABU repair Booth, you can pickup or drop off reels at the Show. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Minneapolis Musky Expo March 9 / 11, 2018 Pimp My Rod and Reel Will have a Booth all 3 Days Ship me your reels now !!!!! Pickup at Show !!!! I’ll also be st Swap Meet Sat Night !!! Or Bring your reels to the Show drop off And get back before Season Open !!! I’ll have Power Handles for Sale at the Minneapolis Musky Show | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Milwaukee Musky Expo this weekend !!!!! Pimp My Rod and Reel Will be working at the ABU GARCIA Booth Repairing Reels this weekend for ABU Garcia. Drop off any reels for Pimp My Rod and Reel at the Show and I’ll mail back before The season opener. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Pimp My Rod and Reels by Richard W. Schmitz aka PIKEMASTER Thanks for the reels from the Milwaukee Musky Expo !!!! March 3rd I’ll be at the Wausau Musky Expo on Saturday and the Swap Meet. Bring Reels to be Detailed and Tuned on Saturday, I’ll be at at the Expo all Day and the Swap, just call my Cell to meetup to drop off Reels. 1 708 514 7777 Text or Call | ||
Madhatter |
| ||
Posts: 39 | I have an old Revo Toro 60 HS with the footplate stamp of 18 02 20/46 AK, I was wondering if it is possible to have the gearing changed to either the 4.6:1 or 5.4:1. I have no idea if you would still have access to the necessary parts, if so a price quote would be great. Thank You. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Madhatter - 2/14/2018 8:25 PM I have an old Revo Toro 60 HS with the footplate stamp of 18 02 20/46 AK, I was wondering if it is possible to have the gearing changed to either the 4.6:1 or 5.4:1. I have no idea if you would still have access to the necessary parts, if so a price quote would be great. Thank You. Yes I have the Gears in Stock I recommend the 5 gears best all around $25 to Clean Detail Tune Gear swap $40 Send reel with note and return address and a cell to Richard Schmitz 90 Hillsman Lane Seneca IL 61360 | ||
supertrollr |
| ||
is that possible to upgrade clicker on the tekota?i would like some that are a lot more louder | |||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | supertrollr - 2/22/2018 11:05 AM is that possible to upgrade clicker on the tekota?i would like some that are a lot more louder No !!! I can make sure they are working and not full of grease. That is about it. | ||
kirkkopplin |
| ||
Posts: 242 Location: Madison | Richard, I have a Revo Nacl 51, I would like to put high speed gears in it. What are my options? | ||
jvlast15 |
| ||
Posts: 300 | Richard, I have a Revo NaCl 60, with a power handle on it, and I would like to make it easier to pull large blades. Do I have any options? | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | kirkkopplin - 2/22/2018 12:24 PM Richard, I have a Revo Nacl 51, I would like to put high speed gears in it. What are my options? You can run 6 gears in your reel To switch is about $60 | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | jvlast15 - 2/22/2018 12:55 PM Richard, I have a Revo NaCl 60, with a power handle on it, and I would like to make it easier to pull large blades. Do I have any options? What gear ratio is your Reel ?? It’s on the drag star | ||
jvlast15 |
| ||
Posts: 300 | 5.4:1...sorry. Meant to put that in original post. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | jvlast15 - 2/22/2018 9:27 PM 5.4:1...sorry. Meant to put that in original post. The 5 gears are the best gears to have If you go with the 4.6 gears it will be easy to reel in but Your line pickup drops to low for any kind of speed. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | I’ll be at Wausau Musky Expo on Saturday Call my cell 1 708 514 7777 To hookup to drop off reels Or buy me a Beer ?? or two I’ll be at the Swap Meet also | ||
true tiger tamer |
| ||
Posts: 343 | Sir; I have 2 Shimano Calcutta TE 400's that need work. What address are you located at and could I send them both to you for repair? One is missing handle parts and the drag knob. | ||
jdeezay74 |
| ||
Posts: 256 Location: plant earth | Pikemaster will the main and pinion gear from older conquest 400 work in a 400 te? And if my memory serves me correct the main and pinion from the conquest is stainless steel. If they work and they are stainless thats a good thing just getting them from japan will be a chore. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | true tiger tamer - 3/4/2018 3:30 PM Sir; I have 2 Shimano Calcutta TE 400's that need work. What address are you located at and could I send them both to you for repair? One is missing handle parts and the drag knob. Yes Send Them ASAP Richard Schmitz 90 Hillsman Lane Seneca IL 61360 Put note on reels with return address and a cell Thanks | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | jdeezay74 - 3/4/2018 3:47 PM Pikemaster will the main and pinion gear from older conquest 400 work in a 400 te? And if my memory serves me correct the main and pinion from the conquest is stainless steel. If they work and they are stainless thats a good thing just getting them from japan will be a chore. The Pinion was a harden steel ! Almost impossible to get Japan Reel Parts Time to Trade them in !!! | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Pimp My Rod and Reel will have a Booth at the 2018 Minneapolis Musky Expo, drop off 4 or More Bait Casting Reels to be Detailed, Tuned and Relubed get a FREE POWER HANDLE for one Reel. Still only $25.00 a Reel to have it Professionally Detailed. All Reels Droped off at the Expo, I’ll get them Back to you by Opening Weekend !!! Stop By and let’s Chat about Reels !!!! | ||
true tiger tamer |
| ||
Posts: 343 | My reels should be on the way today. Thank you for your reply. | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | On my way to Minneapolis 6 hours I got a Full tank of gas, I/2 pack of Smokes, it’s Dark out and I’m wearing Sunglasses | ||
Sidejack |
| ||
Posts: 1080 Location: Aurora | Hit it! | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | I’m all setup The Minneapolis Musky Expo is the Best !!!! Thank You Paul Hartman !!! | ||
PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Well it’s Sunday 12:34pm at the Minneapolis Musky Expo Winding Down, 123 reels Dropped off this year Thanks Heading to ABU Garcia in Spirt Lake Iowa for Factory Training, very Excited for the Opportunity to go ABU Garcia Service Training. | ||
true tiger tamer |
| ||
Posts: 343 | Sir; Could you save the line from my reels as Tuff line is tough to find out here in Wyoming. Thank you. | ||
Jump to page : < ... 16 17 18 19 20 21 22 23 24 > Now viewing page 22 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |