|
|
Posts: 143
Location: Palatine, IL | Should I strip the line off of my reel before sending it in? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Weevil - 10/6/2014 9:00 PM
Should I strip the line off of my reel before sending it in?
NO |
|
| |
|
Posts: 1284
Location: WI | I owe you some $, do you do paypal? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | JKahler - 10/27/2014 10:22 AM
I owe you some $, do you do paypal?
yes use [email protected]
THANKS |
|
| |
|
Posts: 1284
Location: WI | Sent. Sorry for the delay, had a rental car mishap that cost me a ton. |
|
| |
|
Posts: 89
| I have a Calcutta 400D that casts rough and has problems with the engage and dis engage from the cast button. Probably needs a little rebuild love.
Are parts for the D still a pain to get?
I'm sure its all on the up and up but it makes me nervous to send all the information to use one of my credit cards in the mail on the Shimono form. I'm out of warranty. Is it something you can get the parts for or should I bite the bullet and hope I don't end up with an extra big screen on my card when I send it to Shimono.
Thanks for your time
PS. I probably wouldn't be needing it till march at this point |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Long TIme Lurker - 10/27/2014 6:35 PM
I have a Calcutta 400D that casts rough and has problems with the engage and dis engage from the cast button. Probably needs a little rebuild love.
Are parts for the D still a pain to get?
I'm sure its all on the up and up but it makes me nervous to send all the information to use one of my credit cards in the mail on the Shimono form. I'm out of warranty. Is it something you can get the parts for or should I bite the bullet and hope I don't end up with an extra big screen on my card when I send it to Shimono.
Thanks for your time
PS. I probably wouldn't be needing it till march at this point
Parts are still hard to get for the D reels.
but if don't need it till march I should be able to get parts by then.
If you send it to Shimano they may just replace the reel also ?????? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | I want to Thank everyone that sent reels to me in 2014, this year was my best year for reels, and I was sometime 4 months in the rear on returning reels, for that I'm sorry.
For the upcoming year my son and daughter will be helping me to keep up so I should never be more then 6 weeks in the rear, unless parts are on backorder.
Also for 2014 I will try to call or send email when I receivce the reels and the same when they go out. I will invoice you with the reels and then send a ck asap,
I have over $2000.00 out on the books for reels, if they don't pay I will have to have a ck in hand before I send reels out, I hope does not come to that.
Also the price to do a DTR Detail, Tune and Relube will be starting Jan 1 2015 will be $30.00 a reel. So get your reels in to me before then and it is $25.00 a reel.
I will have a show booth at 2015 Chicgo Musky Show and the 2015 MN Musky show so U can drop off reels there or pick them up at the show.
Thank You
Please call me with any suggestions, all are welcome.
cell 708 514 7777 email [email protected]
RICHARD W SCHMITZ aka PikeMaster |
|
| |
|
Posts: 1901
Location: MN | Thanks for being there as a resource for all of us when we need you! If those who still owe you don't fork over payment pretty soon let us all know who they are and we'll embarrass them into paying! |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Propster - 11/4/2014 8:57 PM
Thanks for being there as a resource for all of us when we need you! If those who still owe you don't fork over payment pretty soon let us all know who they are and we'll embarrass them into paying!
Thanks
I'll see and if they don't pay I'll send my friend Guido he carries a Big Stick. |
|
| |
|
Posts: 1126
Location: Minnesota. | PIKEMASTER - 11/4/2014 3:12 PM
I have over $2000.00 out on the books for reels, if they don't pay I will have to have a ck in hand before I send reels out, I hope does not come to that.
I know full well that I'm a good bit naive and this does happen but I still find it inconceivable that anyone who frequents this board and the friends you make here would take advantage of such a service as Pikemaster offers here.
Unbelievable!!!
That is all... |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Now that winter is here Send me your reels NOW !!!!!!
Any reel I get before Jan 1 is $25.00 after Jan 1 $30.00 !!!!!!!!!!!!
Then U can pick them up at one of the Musky Shows and save also on shipping back. |
|
| |
|
Posts: 665
Location: Twin Cities, MN | Just got my reels back so I am set for next season. Thanks again for fixing that " lightly used " D I picked up recently.....
My check is in the mail for you
Pal |
|
| |
|
Posts: 31
Location: Cleveland | Is it possible to put revo toro 61HS gears in a revo toro winch 61? They used to make a high speed left hand retrieve in the 61 series (6.4 ratio), but they stopped several years ago. So the gears should be available right? And the overall case of the reels are the same correct? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | gomez - 11/19/2014 4:14 PM
Is it possible to put revo toro 61HS gears in a revo toro winch 61? They used to make a high speed left hand retrieve in the 61 series (6.4 ratio), but they stopped several years ago. So the gears should be available right? And the overall case of the reels are the same correct?
Maybe ??? the drag stack may be different and the pinion holder may be different also.
I don't do alot of left hand gear swaps, left hand gears are always on back order. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Happy ThanksGiving to all !!!!!!!!!!!!!!!!!!!!!! |
|
| |
|
Posts: 441
| Happy Thanksgiving to you, Richard!
My reels worked awesome, this past summer!
I will be sending you a reel, soon!
John |
|
| |
|
Posts: 167
Location: Tomahawk, WI | Pikemaster, Is the address still correct on the first page? I'll be sending my reels next week. |
|
| |
|
Posts: 470
| Happy Holidays Richard!
Box of reels on the way...
RandalB |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Happy New Year to ALL
See U at the Chicago Musky Show at the Sears Ctn |
|
| |
|
Posts: 53
| PIKEMASTER - 11/19/2014 11:36 PM
gomez - 11/19/2014 4:14 PM
Is it possible to put revo toro 61HS gears in a revo toro winch 61? They used to make a high speed left hand retrieve in the 61 series (6.4 ratio), but they stopped several years ago. So the gears should be available right? And the overall case of the reels are the same correct?
Maybe ??? the drag stack may be different and the pinion holder may be different also.
I don't do alot of left hand gear swaps, left hand gears are always on back order.
Pikemaster did a gear swap for me on a Toro 61 5.4:1 to a 6.4:1. Took awhile cuz as he said the gears were on backorder and tough to get. He was upfront about it taking awhile, and never really was able to provide a timeframe but that was not an issue with him. It was worth the wait for me, especially since he pimped it out. Will be dropping a few reels off at the Chicago show for some pimping. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | ChiefFan08 - 12/31/2014 6:11 PM
PIKEMASTER - 11/19/2014 11:36 PM
gomez - 11/19/2014 4:14 PM
Is it possible to put revo toro 61HS gears in a revo toro winch 61? They used to make a high speed left hand retrieve in the 61 series (6.4 ratio), but they stopped several years ago. So the gears should be available right? And the overall case of the reels are the same correct?
Maybe ??? the drag stack may be different and the pinion holder may be different also.
I don't do alot of left hand gear swaps, left hand gears are always on back order.
Pikemaster did a gear swap for me on a Toro 61 5.4:1 to a 6.4:1. Took awhile cuz as he said the gears were on backorder and tough to get. He was upfront about it taking awhile, and never really was able to provide a timeframe but that was not an issue with him. It was worth the wait for me, especially since he pimped it out. Will be dropping a few reels off at the Chicago show for some pimping.
I been waiting for a Toro 60 frame from ABU for 5 months, they say this month for sure 
Ordering parts is hardest thing I do.
See you at the Chicago Show. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | I will have POWER HANDLES for the Shimano Calcuuta D reels at the NEW Chicago Musky Show at the Sears CTN for sale
(mjx-yQ1rXVaxDUf8HVeUl7g.jpg)
Attachments
----------------
 mjx-yQ1rXVaxDUf8HVeUl7g.jpg (1KB - 589 downloads)
|
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | see You at the Show !!!!!!!!!
NEW LOCATION !!!!!!!!!!!!!!!!!!!
(1833fdca-c683-4295-adc3-31012da0c8a8.jpg)
Attachments
----------------
1833fdca-c683-4295-adc3-31012da0c8a8.jpg (78KB - 556 downloads)
|
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Yes I'm at the New Chicago Musky Show, my booth is in a room off the main floor where the Bar is, Sorry if you were at the show on fri and could not find me.  |
|
| |
|
Posts: 860
Location: NE Ohio | richard,
do you service the bass pro shop muskie reels and do you have carbon fiber drag washers for them? i have a few that i need to get to you if you do. thanks...................pat |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | pklingen - 1/10/2015 9:18 AM
richard,
do you service the bass pro shop muskie reels and do you have carbon fiber drag washers for them? i have a few that i need to get to you if you do. thanks...................pat
Yes I can, send them ASAP with note and a return address and cell and email.
RICHARD W SCHMITZ 90 HILLSMAN LANE SENECA IL 61360 |
|
| |
|
Posts: 667
Location: Wisconsin | Hey Pike
sent you a PM about service/replacing drags on two reels, so, if I mail them to you now would I be able to pick them up at the Milwaukee show?
Thanks, it was good to see you at the chicago show!!!
Clammer |
|
| |
|
Posts: 860
Location: NE Ohio | PIKEMASTER - 1/12/2015 4:03 PM
pklingen - 1/10/2015 9:18 AM
richard,
do you service the bass pro shop muskie reels and do you have carbon fiber drag washers for them? i have a few that i need to get to you if you do. thanks...................pat
Yes I can, send them ASAP with note and a return address and cell and email.
RICHARD W SCHMITZ 90 HILLSMAN LANE SENECA IL 61360
richard,
thanks. will be sending them this week.....................pat |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Clammer - 1/12/2015 3:17 PM
Hey Pike
sent you a PM about service/replacing drags on two reels, so, if I mail them to you now would I be able to pick them up at the Milwaukee show?
Thanks, it was good to see you at the chicago show!!!
Clammer
YES send them ASAP with note that U want to pickup in MILWAUKEE
I will be at the Show all day on SAT and the SWAP MEET |
|
| |
