|
|
Location: Latitude 41.3016 Longitude 88.6160 | achotrod - 8/13/2014 10:02 PM
Can you upgrade NACLs? Is there and upgrades available?
Not alot I can do to them but polish some of the contact points and Relube, I alway replace the fiber drag washer under the main gear with a carbontex one $5.00 |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | I will be stocking a Power Handle for the Calcutta 300 - 400 D reels, $49.95 installed. HD won't bend, longer then the stock handle, foam Paddle has 2 ball bearings.
(mjx-yQ1rXVaxDUf8HVeUl7g.jpg)
Attachments
----------------
 mjx-yQ1rXVaxDUf8HVeUl7g.jpg (1KB - 548 downloads)
|
|
| |
|
Posts: 9
| I sent my reel to you around the 14th of July and was told a month for turn around but have yet to see my reel. I private messaged you a week ago with no reply. Any updates on the status of my RevoToro? Name is Michael Korn. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | KornHands - 8/25/2014 7:18 AM
I sent my reel to you around the 14th of July and was told a month for turn around but have yet to see my reel. I private messaged you a week ago with no reply. Any updates on the status of my RevoToro? Name is Michael Korn.
I try to answer the over 30 texts I get a day, yours must have got lost.
Your Toro I had to order parts to fix the Cast Button system and 1 of the parts is on back order till OCT
If you need the reel sooner I'll take the parts needed out of my reel to fix yours, let me know. Pickup the phone and call me anytime 708 514 7777 better then a Text. |
|
| |
|
Posts: 9
| Thanks for the Update.
No need to take parts off one of your reels, I will make due without. I appreciate the offer.
I will call from now on rather then message.
Thanks again. |
|
| |
|
Posts: 10
| Need some advice on a Saltist 20 HA,reel is two weeks old and the brake system is acting up,reel casts like a dream one minute and than you can actually hear the break start grabbing and you only get half the distance on your cast.Any advice will be greatly appreciated. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | dweible364 - 8/31/2014 3:41 AM
Need some advice on a Saltist 20 HA,reel is two weeks old and the brake system is acting up,reel casts like a dream one minute and than you can actually hear the break start grabbing and you only get half the distance on your cast.Any advice will be greatly appreciated.
The only brakes are the cast controll knob, maybe the spool bearings need some oil ???
or take the cast control knob off and add a drop of oil inside cap. |
|
| |
|
Posts: 300
Location: Minocqua, WI | Richard, I've got the Quantum Cabo PTS that was mailed in June. Not sure if PM from a few weeks ago was received, but wondering what your findings were with it. I'll give you a call this week if that works better. Thanks. |
|
| |
|
Posts: 2009
| Pikemaster- I have an NaCl 60 in 5:4, I keep the drag locked down, then back off 2 clicks. On a couple occasions I noticed that the drag had loosened several clicks. This was while in my hand, and I doubt I was bumping it. Is this common? I am sending in multiple reels after a Nov. trip and was thinking of having you upgrade the drag washers anyway. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | AndrewR - 9/1/2014 6:14 PM
Richard, I've got the Quantum Cabo PTS that was mailed in June. Not sure if PM from a few weeks ago was received, but wondering what your findings were with it. I'll give you a call this week if that works better. Thanks.
Parts are very hard to find for this reel.
Your reel is done, I had to re-engineer some of the used parts to make your reel work. Be in mail on Thurs. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | ARmuskyaddict - 9/2/2014 6:32 PM
Pikemaster- I have an NaCl 60 in 5:4, I keep the drag locked down, then back off 2 clicks. On a couple occasions I noticed that the drag had loosened several clicks. This was while in my hand, and I doubt I was bumping it. Is this common? I am sending in multiple reels after a Nov. trip and was thinking of having you upgrade the drag washers anyway.
Drags will loosened up, make sure the drag star wheel is not worn out, ck the threads on the star wheel, or replace it. |
|
| |
|
Posts: 2009
| Thanks! I will contact you for your details when I am ready to send them in. |
|
| |
|
Posts: 815
Location: Waukee, IA | Do you have 5.3:1 gears for an Ambassadeur C4 6600? I need to slow it down a bit |
|
| |
|
Posts: 58
| PIKEMASTER - 9/4/2014 1:10 AM
AndrewR - 9/1/2014 6:14 PM
Richard, I've got the Quantum Cabo PTS that was mailed in June. Not sure if PM from a few weeks ago was received, but wondering what your findings were with it. I'll give you a call this week if that works better. Thanks.
Parts are very hard to find for this reel.
Your reel is done, I had to re-engineer some of the used parts to make your reel work. Be in mail on Thurs.
i have this reel also, works mint but could be serviced. does the pimping make a big difference? can you upgrade the drag on this?
Quantum cabo PTS |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | tkuntz - 9/4/2014 12:31 PM
Do you have 5.3:1 gears for an Ambassadeur C4 6600? I need to slow it down a bit
I have no ABU Gears in stock APPOX COST $25.00 |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Boss - 9/5/2014 2:58 PM
PIKEMASTER - 9/4/2014 1:10 AM
AndrewR - 9/1/2014 6:14 PM
Richard, I've got the Quantum Cabo PTS that was mailed in June. Not sure if PM from a few weeks ago was received, but wondering what your findings were with it. I'll give you a call this week if that works better. Thanks.
Parts are very hard to find for this reel.
Your reel is done, I had to re-engineer some of the used parts to make your reel work. Be in mail on Thurs.
I have NO PARTS for Quantum Reels and they R very hard to find.
Carbontex drag washers will fix the drag.
i have this reel also, works mint but could be serviced. does the pimping make a big difference? can you upgrade the drag on this?
Quantum cabo PTS |
|
| |
|
Posts: 1
| Pikemaster,
I'm curious as to your opinion on custom tuning a Daiwa Lexa 300 with Power Handle. I bought one the other day but my die hard Shimano mindset keeps pushing doubt into my head. I typically fish inshore saltwater here in Central Florida but bought the reel and paired it with a Star split handle rod that seems very balanced. Your thoughts on the reel? Thanks. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Edpants59 - 9/9/2014 8:51 PM
Pikemaster,
I'm curious as to your opinion on custom tuning a Daiwa Lexa 300 with Power Handle. I bought one the other day but my die hard Shimano mindset keeps pushing doubt into my head. I typically fish inshore saltwater here in Central Florida but bought the reel and paired it with a Star split handle rod that seems very balanced. Your thoughts on the reel? Thanks.
The 300 Lexa I don't like to tune them because they R a price point reel with Daiwa and they don't come out very smooth. Good reel for the $$$ |
|
| |
|
Posts: 251
| I am a lefty and was wondering what your thoughts would be the best bet on a double 10 reel. I would like something that I could burn them in with and not kill myself. I have a couple TE's that I am happy with but would like something a little faster that will hold up.
Thank you! |
|
| |
|
Posts: 111
Location: somewhere! | How many weeks out are you? If I send them now can I get them back before nov1?
|
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | kdebell - 9/12/2014 8:17 AM
I am a lefty and was wondering what your thoughts would be the best bet on a double 10 reel. I would like something that I could burn them in with and not kill myself. I have a couple TE's that I am happy with but would like something a little faster that will hold up.
Thank you![/QUOTE
]Not much better then your TE in lefty right now. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | charlesb - 9/12/2014 12:57 PM
How many weeks out are you? If I send them now can I get them back before nov1?
I will gone till OCT 2
if you send then OCT 1 U will have them back by NOV 1 |
|
| |
|
Posts: 123
| Hey Pikemaster, I have a NACL 60 6:4:1 and the drag isn't working properly. I replaced all the washers and what not on under the handle, and still have the same problem. I can tighten it all the way down, and still pull line out by hand. Wondering what you think is wrong and if possible how much you think it would cost to fix? It must be something inside the reel that's not working right. I bought it off eBay and it was advertised as new, and clearly it wasn't new or in working order lol. Thanks! |
|
| |
|
Posts: 1901
Location: MN | Are you sure the line is not just slipping on the spool? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Beatsbyair - 9/18/2014 9:29 AM
Hey Pikemaster, I have a NACL 60 6:4:1 and the drag isn't working properly. I replaced all the washers and what not on under the handle, and still have the same problem. I can tighten it all the way down, and still pull line out by hand. Wondering what you think is wrong and if possible how much you think it would cost to fix? It must be something inside the reel that's not working right. I bought it off eBay and it was advertised as new, and clearly it wasn't new or in working order lol. Thanks!
Make sure U have Mono on the spool first then your braid.
Also make sure the metal drag washers are ( ) on the drive shaft.
Send me the reel something is wrong, I get $25.00 a reel plus parts. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | I'm back from Canada
any reels I have will be done this week.
I'm out about 10 days right now. |
|
| |
|
Posts: 123
| Thanks for the reply's. The problem was infact the lack of mono/elec tape. For some reason I thought I could get away without it, but it turns out I couldn't! |
|
| |
|
Posts: 815
Location: Waukee, IA | Pikemaster, I have a 5600CB that I'm retiring this winter but I still need it for fall. I'm having a problem with the spool and handle turning backwards when I put pressure on the line. What part(s) do I need to replace to fix this? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | tkuntz - 9/30/2014 9:59 PM
Pikemaster, I have a 5600CB that I'm retiring this winter but I still need it for fall. I'm having a problem with the spool and handle turning backwards when I put pressure on the line. What part(s) do I need to replace to fix this?
The AR Bearing is bad, U have to buy the side plate with the bearing from ABU, appox $30.00 I can press in a new AR Bearing into the old side plate for $15.00
U need to send reel or side plate so I can do it. |
|
| |
|
Posts: 977
| Pikemaster do you have any pics of the power handle for the Calcutta D installed on the reel? |
|
| |
