|
|
| sworrall - 3/21/2013 4:08 PM
Hey Richard . I have a couple Calcutta Muskie reels and 5 Abu Garcia 6500's that need a complete service. Please let me know what the cost would be and an address
To drop them off for service.
Thank you sir.
[email protected]
Richard AKA PIKEMASTER has joined forces with OutdoorsFIRST as our official rod and reel service and repair specialist.
This thread is dedicated to questions specifically for PIKEMASTER, and discussions on his specialty. Welcome aboard sir! |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Kronny - 11/12/2013 8:39 PM
sworrall - 3/21/2013 4:08 PM
Hey Richard . I have a couple Calcutta Muskie reels and 5 Abu Garcia 6500's that need a complete service. Please let me know what the cost would be and an address
To drop them off for service.
Thank you sir.
[email protected]
Richard AKA PIKEMASTER has joined forces with OutdoorsFIRST as our official rod and reel service and repair specialist.
This thread is dedicated to questions specifically for PIKEMASTER, and discussions on his specialty. Welcome aboard sir!
$25.00 a reel plus any parts that needs replacing or I can up grade. $10.00 total for return shipping. Send email, cell and return address and a note on what is wrong on each reel. When I'm done I'll invoice U.
RICHARD W SCHMITZ aka PikeMaster |
|
| |
|
Posts: 43
| good evening,
do you work on bass pro musky reels, the pete maina ones |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | jjm msky - 11/26/2013 8:18 PM
good evening,
do you work on bass pro musky reels, the pete maina ones
I can, but I don't stock any parts for that reel. |
|
| |
|
Posts: 483
Location: NE PA | Richard,
Is it possible to interchange gearsets between a saltist 20 levelwind and a non-level wind hyper speed model? If so could you pm me a price on this swap? I like the saltist, want to stay with the levelwind feature, like the size of the 20 series but want that 40+ inches of pickup offered in the bigger models. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | lennyg3 - 11/30/2013 8:28 PM
Richard,
Is it possible to interchange gearsets between a saltist 20 levelwind and a non-level wind hyper speed model? If so could you pm me a price on this swap? I like the saltist, want to stay with the levelwind feature, like the size of the 20 series but want that 40+ inches of pickup offered in the bigger models.
Not sure if the gears will work ???????? Plus I'm sure a gear set from Daiwa is over $50.00 I'll have to do some cking on this one. |
|
| |
|
Posts: 977
| Richard does shimano sell the 6:9 gears that are in the 300 ej and would they be compatible on the 301e? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Ronix - 12/1/2013 6:55 AM
Richard does shimano sell the 6:9 gears that are in the 300 ej and would they be compatible on the 301e?
NO the 300EJ gears wil not fit in the 301E, U have to have a left hand reel to left hand reel. |
|
| |
|
Posts: 977
| Does shimano sell gears in that ratio that would work in the 301 or am I SOL? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Ronix - 12/2/2013 11:59 AM
Does shimano sell gears in that ratio that would work in the 301 or am I SOL?
The 301E only comes in 6.2:1 gears, for left hand reels.
On a 300E they can use a 6.2:1 and a 6.9:1 for right hand reels.
I know if I was a lefty I would learn to use a right hand reel, so many more options, plus parts like the gear sets are 1/2 the cost to replace, plus most right hand parts are in stock, I have 12 sets of 401TE gears on back order since Sept from Shimano !!!! |
|
| |
|
Posts: 977
| i'm honestly considering learning to reel right handed, might just buy an ej and force myself to do it! |
|
| |
|
Posts: 483
Location: NE PA | PIKEMASTER - 12/1/2013 3:58 AM
lennyg3 - 11/30/2013 8:28 PM
Richard,
Is it possible to interchange gearsets between a saltist 20 levelwind and a non-level wind hyper speed model? If so could you pm me a price on this swap? I like the saltist, want to stay with the levelwind feature, like the size of the 20 series but want that 40+ inches of pickup offered in the bigger models.
Not sure if the gears will work ???????? Plus I'm sure a gear set from Daiwa is over $50.00 I'll have to do some cking on this one.
Still very interested in this. If you could look into it and get back to me I would appreciate it. |
|
| |
|
Posts: 1660
Location: central Wisconsin | Hey Pikemaster,
On a 400D is it possible to reduce the width of the thumb bar to make it more the size of the 400TE or 400B. Or could it be changed over to that style? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Jeff78 - 12/7/2013 7:50 AM
Hey Pikemaster,
On a 400D is it possible to reduce the width of the thumb bar to make it more the size of the 400TE or 400B. Or could it be changed over to that style?
NO
U can add the metal line guide to the D over the plastic one, I can do that for about $45.00 appox |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | lennyg3 - 12/4/2013 9:07 AM
PIKEMASTER - 12/1/2013 3:58 AM
lennyg3 - 11/30/2013 8:28 PM
Richard,
Is it possible to interchange gearsets between a saltist 20 levelwind and a non-level wind hyper speed model? If so could you pm me a price on this swap? I like the saltist, want to stay with the levelwind feature, like the size of the 20 series but want that 40+ inches of pickup offered in the bigger models.
Not sure if the gears will work ???????? Plus I'm sure a gear set from Daiwa is over $50.00 I'll have to do some cking on this one.
Still very interested in this. If you could look into it and get back to me I would appreciate it. |
|
| |
|
Posts: 977
| Richard,
The knob on my silver revo toro 61 is about to break off and i was wondering which other power handles out there would fit these reels? |
|
| |
|
Posts: 231
| Ronix, the Calcutta 700B power handle works very well the Toro |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Chas - 12/17/2013 1:10 PM
Ronix, the Calcutta 700B power handle works very well the Toro
I'm not sure if a 700B handle will fit the Toro ????
I would get the newer Toro NaCI Power handle. That handle is very long and will give U alot more torque for DCG 10-13.
I also have a 5"long Double Paddle handle that is HD and will not engage the reel on casts for $30.00
Attachments
----------------
 tn.jpg (1KB - 594 downloads)
|
|
| |
|
Posts: 29
| Hi PM. I have a Pete Maina PMX 3000 MH BPS reel. Can't find a schematic for it anywhere. The reel looks like a Cardiff but I haven't opened it up yet. Any idea where I could find a schematic or what this reel is a knock off of?
Thanks
PS
Merry Christmas everyone. |
|
| |
|
Posts: 1901
Location: MN | Lunker,
Should be a Pflueger Trion reel. I think I have a schematic if interested. PM me with your email and I'll scan and send to you. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | CALL 1 417 873 5274
That is OutDoor World and they have all the Schmatics for all the different models of the Pete Mania Musky reels and that is also where U can order Parts from. |
|
| |
|
Posts: 29
| Propster - 12/17/2013 10:52 PM
Lunker,
Should be a Pflueger Trion reel. I think I have a schematic if interested. PM me with your email and I'll scan and send to you.
Thanks Propster. I'll check around a bit further before bother you on that. Much appreciated.
PM. Thanks for the info. I'll check on it.
Larry |
|
| |
|
Posts: 340
Location: Lake County Illinois | I purchased a few reels on clearance from Bass Pro as backups a few years back,the employee said they were the same as the Pete Maina round reels but silver.He showed me both reels and they were identical except for the color.The ones I purchased are Browning Six Rivers model SR3000S.I checked and I do have a parts diagram but do not have a scanner,hope this helps. |
|
| |
|
Posts: 29
| Thanks for all the offers on the reel. I've cleaned it and all is good. I wanted to get new drag washers but what I think I'll do is measure them and try Smooth Drag to get carbon fibre vice replacing what I think are teflon (white washers).
Thanks again everyone for your time and Merry Christmas.
Never did find a schematic or who made this reel. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Merry Christmas to all  
See U at the 2014 Chicago Musky Show, Pimp My Rod & Reel will be at booth 35, so bring me all your reels that need to be repaired. $26.00 a reel !!!!!!!!!!
Bring me 4 or more Baitcaster Reels and get a $30.00 5 inch Power Handle for FREE !!!!!!! |
|
| |
|
Posts: 667
Location: Wisconsin | Same to you Richard, MERRY CHRISTMAS!! Looking forward to the show as well.
How you doing on my DSV's??? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Clammer - 12/23/2013 8:39 PM
Same to you Richard, MERRY CHRISTMAS!! Looking forward to the show as well.
How you doing on my DSV's???
will U be at the Chicago Show ??? if so I'll have then done and U can pick them up at the show. Let me know. |
|
| |
|
Posts: 667
Location: Wisconsin | PIKEMASTER - 12/23/2013 8:53 PM
will U be at the Chicago Show ??? if so I'll have then done and U can pick them up at the show. Let me know.
See you there! Hard to believe it is only a few weeks away! |
|
| |
|
Posts: 977
| Richard, could I put the revo nacl star drag on an older toro 61 and make it compatible with the nacl paddle handles? |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Ronix - 12/27/2013 1:16 PM
Richard, could I put the revo nacl star drag on an older toro 61 and make it compatible with the nacl paddle handles?
I'm sure that will work. |
|
| |
