MuskieFIRST | Iwata HP-C issues » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: "Something to think about: If you fish the wrong bait long and hard enough, it will sooner or later become the right bait." -- John Gierach
- (Added by: mikie)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Iwata HP-C issues

Message Subject: Iwata HP-C issues

Turkeyt

Posted 8/14/2015 8:43 PM (#780488)
Subject: Iwata HP-C issues

Posts: 260

Location: Almost Heaven

I have 2 of these brushes and I would like to know if anyone can help. One brush has low air pressure at the nozzle. Brush/nozzle is clean and air valve is working fine. (I switched them with no difference from other brush) Does the packing or o ring that the needle goes through cause any loss of air or bypass somehow? Thanks for any info.

muskie tamer

Posted 8/14/2015 11:50 PM (#780502 - in reply to #780488)
Subject: Re: Iwata HP-C issues

Posts: 411

Location: Waconia,MN

The o ring my be bad and it's allowing the needle cap to get to close to the nozzle.

MRichardson

Posted 8/15/2015 7:35 AM (#780514 - in reply to #780488)
Subject: RE: Iwata HP-C issues

Are you positive it's clean? Have you tried soaking it in restorer?

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread