Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> winterizing
 
Reply New post
Message Subject: winterizing
BLIZZAK
Posted 10/22/2014 8:28 PM (#736216)
Subject: winterizing




Posts: 255


Iam sure this topic has come up before do you need to fog a 4 stroke?
Topic came up at work today and was debated whats your thoughts?
BBT
Posted 10/27/2014 9:37 AM (#737014 - in reply to #736216)
Subject: Re: winterizing




Posts: 134


"need" seems to be the key word there. You probably "should" fog them. It doesn't hurt anything, it's cheap, just one more preventative step. sooooo, why not?
cave run legend
Posted 10/27/2014 9:53 AM (#737017 - in reply to #737014)
Subject: Re: winterizing





Posts: 2097


I put a tsp of oil in the block and do the same with my optimax. I am sure it will take longer than the winter to form rust though in my oppinion.
Shep
Posted 10/27/2014 10:08 AM (#737022 - in reply to #737017)
Subject: Re: winterizing





Posts: 5874


Is your 4-stroke injected or carbed? If carbed, go ahead. If injected, I would not, as you run the risk of clogging the injectors.

Putting oil in the cylinder does nothing, but create a puddle of oil that will likely foul your plugs next spring on first start.

Run Stabil or your preferred brand of fuel stabilizing product through the motor, check/replace fuel filter/water separator, check the lower unit for water, repair seal if required, replace lower unit lube, check/repack you trailer wheel bearings, and plug in your onboard charger. You'll be good to go next spring.
Jeremy
Posted 10/27/2014 10:15 AM (#737025 - in reply to #737022)
Subject: Re: winterizing




Posts: 1126


Location: Minnesota.
Shep - 10/27/2014 10:08 AM

Is your 4-stroke injected or carbed? If carbed, go ahead. If injected, I would not, as you run the risk of clogging the injectors.

Putting oil in the cylinder does nothing, but create a puddle of oil that will likely foul your plugs next spring on first start.

Run Stabil or your preferred brand of fuel stabilizing product through the motor, check/replace fuel filter/water separator, check the lower unit for water, repair seal if required, replace lower unit lube, check/repack you trailer wheel bearings, and plug in your onboard charger. You'll be good to go next spring.


What Shep said. I prefer Seafoam as a fuel stab. in any and all my engines but that's just me.

cave run legend
Posted 10/27/2014 10:33 AM (#737030 - in reply to #737025)
Subject: Re: winterizing





Posts: 2097


If optimax, I run the additives they recommend. Put quickstore in the last tank of the year.
esoxriebe
Posted 11/1/2014 9:25 AM (#738000 - in reply to #736216)
Subject: Re: winterizing




Posts: 95


If fuel injected use Marvel Mystery Oil 4 oz to 10 gallons will not clog injectors actually lubricates the entire fuel system and upper cylinders.
sworrall
Posted 11/1/2014 10:24 AM (#738009 - in reply to #736216)
Subject: Re: winterizing





Posts: 32801


Location: Rhinelander, Wisconsin
Want to win a 9' TI rod and some Sea Foam bling?

Ask the questions here:

http://muskie.outdoorsfirst.com/board/forums/thread-view.asp?tid=99...
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)