|
|
Posts: 560
| I am looking to replace the drag washers on my abu revo toro 50 hs and 50 5.4.1
Does anyone know if these will work or if there are others that I should look at?
http://www.ebay.com/itm/Carbontex-Drag-Washer-Set-Abu-Garcia-Toro-5... |
|
|
|
Posts: 1100
| The toro is Born with Carbon tech drags |
|
|
|
Posts: 560
| Zinox - 11/4/2016 1:51 PM
The toro is Born with Carbon tech drags
Yes, and I want to replace them with new ones. I found what I listed above from ebay but wondered if these are what I want. |
|
|
|
Location: Latitude 41.3016 Longitude 88.6160 | Yes that is the kit you want
Carbontex washers NEVER NEED REPLACING just clean them in Acetone and dry, grease or not
All Toro Reeels I replace the stock fiber drag washer under the main gear and ratchet
With a Carbontex Washer # 11 from Smooth Drags.
FYI don't use any grease, Cal's Drag grease is what I use you can get it from Smooth Drags, ask for Dawn
|
|
|
|
Posts: 560
| PIKEMASTER - 11/5/2016 6:57 AM
Yes that is the kit you want
Carbontex washers NEVER NEED REPLACING just clean them in Acetone and dry, grease or not
All Toro Reeels I replace the stock fiber drag washer under the main gear and ratchet
With a Carbontex Washer # 11 from Smooth Drags.
FYI don't use any grease, Cal's Drag grease is what I use you can get it from Smooth Drags, ask for Dawn
Thanks PIKEMASTER! |
|
|