|
|
Posts: 7
| Hi Guys,
New to the forum, after reading all your posts and viewing the beautiful work all of you do, I thought I would give it a try.
I have lots of questions, but will limit myself.
1. I'm using Envirotex for top coat, how many coats do you put on?
2, The baits I have done, have some bumps on finish. Maybe bubbles or dirt? Is it possible to get a perfect finish?
Any opinions would be appreciated.
I have attached a recent bait I completed
Thanks
Attachments ---------------- IMG_0695.JPG (58KB - 255 downloads)
|
|
|
|
Posts: 567
| Use at least 2 coats, 3 if possible. Use a heated gun or torch to pop the bubbles, it will be smooth as glass |
|
|
|
Posts: 7
| Ok thanks. will give it a try. |
|
|
|
Posts: 403
Location: Lakeville, MN | Careful not to burn the paint with heat, first couple coats are easy to do it on. Use a rotisserie or some device to rotate the lure so the epoxy evens out over the entire lure as it cures
Edited by genesisperformance 2/15/2016 5:09 PM
|
|
|
|
Posts: 7
| Yeah I learned the hard way with the heat.....the coat prior bubbled....oops.
Ill just keep trying |
|
|