|
|
Posts: 424
| Hi
Someone knows the measures ( Length, Width and Thickness / Height ) of the 50 and 60 Revo Toro Beast and of the 50 and 60 Revo Toro S ?
esoxone |
|
| |
|
Posts: 865
| 60's and 61's are the exact same dimensions in the S Models and Beasts , the 50's and 51's are smaller and have a shorter in height spool as well..
|
|
| |
|
Posts: 865
| Was told gears are replaceable in the same series reels..... so High speed gear can be replaced with the 4.9 Gear..... Great Feature
|
|
| |
|
Posts: 1901
Location: MN | I believe that's a given and understood. I think he's asking for actual dimensions |
|
| |
|
Posts: 865
| I was just informing him that they are the same 50S and 50 Beast and 60S and 60 Beast.... so only 2 reel dimensions need to be obtained....... I don't have exact measurements, nor have I seen them posted.... Call Abu ? |
|
| |
|
Posts: 1901
Location: MN | Ah, I gotcha. I thought you were saying the 50s were the same size as the 51s. I guess I didn't realize the S was the same size as the Beast. Reading John Tuttles review and a few other things I was under the impression the Beast was bigger |
|
| |
|
Posts: 78
| Propster - 10/2/2015 7:11 PM
Ah, I gotcha. I thought you were saying the 50s were the same size as the 51s. I guess I didn't realize the S was the same size as the Beast. Reading John Tuttles review and a few other things I was under the impression the Beast was bigger
If you read the whole thread carefully you will note they are the identical sizes for the respective 50 and 60 reels. IE the Toro S 60 is the identical size as the Beast 60, the 50 is identical to the other 50's. All parts are interchangeable throughout all the respective sizes as long as all needed parts are present. I even put the Toro S 60 side plates onto the Toro Beast 60 and they are truly identical, other than color :).
But I don't think you can use the 50 side plate on a 60 etc, even though most internal parts are identical. The spools are not the same height so the frames have to be different in the 50 or 60, I believe. |
|
| |
|
Posts: 424
| Propster - 10/2/2015 7:30 PM
I believe that's a given and understood. I think he's asking for actual dimensions
Yes, it was what I wanted to know.
I wanted to know the dimensions in inches / centimeters of length, width and thickness of the model / size 60 and of the model / size 50 of the new toro beast and revo toro S reels.
I apologize to all if I did not explain well what I wanted to know
esoxone
|
|
| |
|
Posts: 78
| esoxone - 10/3/2015 10:30 AM
Propster - 10/2/2015 7:30 PM
I believe that's a given and understood. I think he's asking for actual dimensions
Yes, it was what I wanted to know.
I wanted to know the dimensions in inches / centimeters of length, width and thickness of the model / size 60 and of the model / size 50 of the new toro beast and revo toro S reels.
I apologize to all if I did not explain well what I wanted to know
esoxone
I think the stumper has been not many have the different sizes to compare.
The Toro 60 is 90mm long from thumb button to the farthest tip of the cross bar. The 50 should be the same dimension. The height of the 60 side plate is ~55mm (it is a curved plate so the measurement is approximate). Conversely, on the gear side it is ~70mm to accommodate the massive main gear.
Lastly, I think the reluctance for anyone to take the time is the limited utility these dimensions really have. You just need to get them in your hands!  |
|
| |
|
Posts: 1000
| are you wondering how it compares to the old toro's and a lexa? Held a 60 today. It's closer to a lexa in dimensions than the old toros. great fit for my hand. found the old nacl's to be too wide/low profile. It's a bigger reel than the nacl 60 |
|
| |
|
Posts: 424
| Thank you to everyone you for your help.
I have a news.
One of my friends has seen and touched the RevoToro Beast and the Revo Toro S.
He has told me that the 60 and the 50 are both the same size. Only changes the spool size : the 60 spool is deeper.
esoxone
|
|
| |
