Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> Mounting a transducer to a wood boat
 
Reply New post
Message Subject: Mounting a transducer to a wood boat
milje
Posted 3/11/2015 5:18 PM (#758973)
Subject: Mounting a transducer to a wood boat




Posts: 410


Location: Wakefield, MI
In about a month I'm going to go pick up my row troller, and a few weeks ago I picked up a Lowrance Elite 7 Chirp. What do I have to do to seal up the holes when I mount the transducer? Drilling into wood below the waterline makes me a bit nervous.

Edited by milje 3/11/2015 5:34 PM
Pointerpride102
Posted 3/11/2015 6:03 PM (#758978 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat





Posts: 16632


Location: The desert
How about mounting to a poly board and adhering that board to the boat with some adhesive, no holes in the boat that way.
milje
Posted 3/11/2015 7:15 PM (#758993 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat




Posts: 410


Location: Wakefield, MI
That was my other thought, if I can't find a good solution I may go that way.
Tigerhunter
Posted 3/11/2015 7:41 PM (#759000 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat





Posts: 283


You could use some aluminum to rig up a bracket that you can attach above the waterline/on top of the transom. I did this when I wanted to transfer my transducer between 2 boats, it worked quite well. With a little engineering it could be worked into something more permanent.
R code
Posted 3/11/2015 7:51 PM (#759001 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat




Posts: 270


Location: SE WISCONSIN
What about this www.sternmate.com

Edited by R code 3/11/2015 7:52 PM
beerforthemuskygods
Posted 3/11/2015 8:53 PM (#759010 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat




Posts: 410


Location: one foot over the line
I use an aluminum/quick-release clamp/transducer mount, that i bought from cabelas, on the back of my go-devil.

Edited by beerforthemuskygods 3/11/2015 9:45 PM
milje
Posted 3/11/2015 9:02 PM (#759011 - in reply to #759010)
Subject: Re: Mounting a transducer to a wood boat




Posts: 410


Location: Wakefield, MI
beerforthemuskygods - 3/11/2015 8:53 PM

I use an aluminum/quick-release clamp/transducer mount on the back of my go-devil that i bought from cabelas.


This?

http://www.cabelas.com/product/Portable-Transducer-Bracket/699847.u...

That might be my best bet. I was going to buy a second transducer to mount on my dads boat so I could use my Lowrance on there. This will make it much better, no idea why I didn't think to look for something like this. Thanks man!
beerforthemuskygods
Posted 3/11/2015 9:42 PM (#759028 - in reply to #758973)
Subject: Re: Mounting a transducer to a wood boat




Posts: 410


Location: one foot over the line
Yes, that's the one. I have beat the snot out of my go-devil and that bracket has held up to everything. I didn't have alot of faith in it at first, but i'm using mine for the fourth year now and am very impressed. Very easy on easy off. Highly recommend it. good luck
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)