Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Tuffy E Mag question

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

tswoboda

Posted 6/11/2020 4:27 PM (#961201 - in reply to #957171)
Subject: Re: Tuffy E Mag question

Posts: 349

miket55 - 4/5/2020 9:54 AM

sworrall - 3/23/2020 10:57 AM

5 degree wedges and a stainless prop will help a lot.

Thanks much for the advice, wedges are ordered... one more question..

Current aluminum prop is 14X11 3 blade, and runs 6000 rpm/ 29 mph. WOT. stay with the same pitch or change?

Again thanks for the help!

Did the wedges help you with the porpoising?

I installed a set this spring and they didn't help at all, still porpoises before it cavitates when trimming up on plane. Moved the motor up 2 holes and still no change after that as well.