Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Large screen mounts

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

[QUOTE]Jerry Newman - 12/14/2019  9:59 AM

I just remembered something - if considering a direct dash mount.

It looks like the 12” Bird has the same issue of not having enough pre-drilled holes on the outside portion of their bracket like Lowrance, and even with the top unit being directly mounted to the dash there was still some unnecessary vibration due to only being attached in the center portion of the factory bracket.

To resolve the issue I drilled 2 extra bolt holes to the extreme outside edge of the bracket (for a total of 6), and this completely removed that little bit of unnecessary vibration.

I know that this install not main stream, and would guess that most people automatically assume installing on a mount while rigging their boat is the best way to go, but even with the shortest arm they still can stick up and block vision at the helm. They are also just that much further away from the kicker remote... heck, I even switched the main and kicker remote locations because I spend so more time trolling. That was an even sweeter move!

I can remember mentioning the direct bracket install to a good friend who owned the same model boat, he immediately said he never even considered that, but what if I wanted to chase the angle.

My reply was simply that I just mounted it at the same angle as the factory in-dash unit, and that in my previous boat when I had them on mounts I never changed the angle anyway. The most solid install possible, with enhanced user friendly performance  for less $ was hard for him to argue with. 
[/QUOTE]

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

Jerry Newman

Posted 12/14/2019 9:59 AM (#951048 - in reply to #951035)
Subject: Re: Large screen mounts

Location: 31

I just remembered something - if considering a direct dash mount.

It looks like the 12” Bird has the same issue of not having enough pre-drilled holes on the outside portion of their bracket like Lowrance, and even with the top unit being directly mounted to the dash there was still some unnecessary vibration due to only being attached in the center portion of the factory bracket.

To resolve the issue I drilled 2 extra bolt holes to the extreme outside edge of the bracket (for a total of 6), and this completely removed that little bit of unnecessary vibration.

I know that this install not main stream, and would guess that most people automatically assume installing on a mount while rigging their boat is the best way to go, but even with the shortest arm they still can stick up and block vision at the helm. They are also just that much further away from the kicker remote... heck, I even switched the main and kicker remote locations because I spend so more time trolling. That was an even sweeter move!

I can remember mentioning the direct bracket install to a good friend who owned the same model boat, he immediately said he never even considered that, but what if I wanted to chase the angle.

My reply was simply that I just mounted it at the same angle as the factory in-dash unit, and that in my previous boat when I had them on mounts I never changed the angle anyway. The most solid install possible, with enhanced user friendly performance for less $ was hard for him to argue with.

Edited by Jerry Newman 12/14/2019 3:19 PM

Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window

Click to expand / contract the width of this image

(Elec (1) - Copy.jpg)

Attachments
----------------

Elec (1) - Copy.jpg (37KB - 453 downloads)