Posts: 860
Location: NE Ohio | i put two H10's on my new lund this year, bow and helm, networked together, and used a heavy duty 30 amp regular in-line fuse holder on each under the dash. i put in ONLY 4 AMP fuses as the manual called for. the reason i used the heavy fuse holder was because i used 10 ga. wire to make the runs to the locators. i connected them to the hot side and the ground side of the boats fuse panel. the boats owners manual suggested this so it shuts the power down to these units when you shut off the main power switch. this power is all connected to the starting battery.
i have no interference from anything that i can see or tell and the units have been working flawlessly for 3 months now.
|
