Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Helix 9 SI and 859 DI display lines issue

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

mtcook16

Posted 9/1/2016 12:19 PM (#829190 - in reply to #829165)
Subject: Re: Helix 9 SI and 859 DI display lines issue

Posts: 546

Location: MN

bllhogg - 9/1/2016 9:04 AM

mtcook16 - 9/1/2016 8:19 AM

Toporanger - 8/30/2016 4:55 PM

I dont mean split screen. I mean I can run SI big screen on one unit and DI big screen on another unit using the same transducer. With the ethernet hub I can even put the SI image on the non SI unit. You might even be able to get away with not using the hub and just networking the two units. I needed the hub to run the terrova Ipilot +.

This is correct. Any units networked, either with an ethernet hub or just a 2 units connected with a single Ethernet cable, can share waypoints, trails, external GPS info, and transducer views. So, link a SI unit to any other unit and you will have SI, DI and 2D on the other unit.

I have the exact same two units... If i get the Ethernet cable between them, will they also be able to share one Lakemaster chip?

Each unit needs separate lake chips

Edited by mtcook16 9/1/2016 12:22 PM