| crappie usa 1 - 2/20/2012 12:03 PM
take the head off the terrova by removing 4 screws, remove the bolt and nut below the head as well...This keeps the wire completely out of the way and is very simple to do.
what he said. this is very clean and neat, no more flapping wires!
i used LocTite marine adhesive instead of the Dow adhesive, and zip-ties at the base since they hold tight more permanently than tape. it's an easy job that takes less than an hour, and requires very little mechanical skill.
there's a photo-essay that will walk you through the process at this link, the author just asks you to sign his guestbook in "payment" for the info. the Terrova/transducer cable portion is pictures #123-131:
http://imageevent.com/okoboji_images/hummingbirdsideimaging
one limitation that the author of that photo-essay points out is that the Humminbird cables will fit in the slot; the Lowrance HDS cables do not.
Edited by lambeau 2/20/2012 3:43 PM
|