Posts: 41
Location: Wheaton, MN | I came up with a method for mounting the transducer on the Terova and it doesn't interferre with any part of the stowing or deploying. I had it out and tried it out today and with the motor turned in any direction before it is stowed doesn't make a differance it didn't catch on anything. You do have to pull the chord up after each deployment but thats a minor detail. Here's the pictures of how I did it. All it takes is an oversized electrical wire staple, I used the biggest one I could find, and a small ziptie. I don't know if this would work with fiberglass on the bow but there are has to be ways to do it.
http://i17.photobucket.com/albums/b84/jlb66/100_1737.jpg
http://i17.photobucket.com/albums/b84/jlb66/100_1738.jpg
http://i17.photobucket.com/albums/b84/jlb66/100_1740.jpg
http://i17.photobucket.com/albums/b84/jlb66/100_1741.jpg
Just what I came up with that works great.
Edited by jlb66 5/11/2009 6:30 PM
|