Posts: 2687
Location: Hayward, WI | I'm not that familiar with the Terrova, but I have a V2. I'm thinking they must be similar in regard to cable routing? My cable is electrical taped at the top of the shaft, and then the cable is run through the "pigtail" looped and plastic coated cable that goes from the head of the unit to the base.
Not sure if this is the problem you guys are having, or if my description is clear enough. I'll have to try to take a picture and post how I did it.
Yes, you can wrap the cord up if you let the head keep turning too much...but the solution to that is to not do it! I wasn't ever a problem for me. Just leave yourself some slack so the motor can turn enough and you should be fine.
curleytail |