Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> Update software?
 
Reply New post
Message Subject: Update software?
Pepper
Posted 5/7/2021 10:26 AM (#979740)
Subject: Update software?




Posts: 1516


Do you update the software in your locators? Seems like a hassle is it worth the effort?
ToddM
Posted 5/7/2021 10:46 AM (#979741 - in reply to #979740)
Subject: Re: Update software?





Posts: 20178


Location: oswego, il
I have done it to all of mine. The updates are to correct issues. Just like anything with software do the update.
Pepper
Posted 5/7/2021 11:33 AM (#979745 - in reply to #979740)
Subject: Re: Update software?




Posts: 1516


Todd do u do it yourself? U say u have it done to all of yours
WILLEB
Posted 5/7/2021 4:44 PM (#979756 - in reply to #979740)
Subject: Re: Update software?




Posts: 60


I suggest to save your waypoints data first on a different card. I have a new unit and tried the update via bluetooth from the Humminbird Fish Smart app, and the app did not play well with my Helix 10 G4N. Went back to the SD card method and it worked well, and fast.
ToddM
Posted 5/7/2021 7:52 PM (#979758 - in reply to #979740)
Subject: Re: Update software?





Posts: 20178


Location: oswego, il
Mine are Lowrance and I did it with an SD card. Downloaded from the website put it on the card, placed the card in the map slot and turned on the unit. It prompts you from there. If you have an older lowrance you need an SD card 1 gig or smaller which means you will have to buy one online, they don't sell them that small anymore in stores.

Edited by ToddM 5/7/2021 7:53 PM
RyanJoz
Posted 5/7/2021 8:15 PM (#979759 - in reply to #979740)
Subject: Re: Update software?




Posts: 1675


Location: Mt. Zion, IL
If you have lowrance, the factory recommends saving settings and waypoints before updating. Then perform the update. After updating, perform a hard reset, then load settings and waypoints. This is the factory recommended procedure from several calls with Lowrance 2nd tier support.
nar160
Posted 5/11/2021 2:50 PM (#979819 - in reply to #979740)
Subject: Re: Update software?




Posts: 408


Location: MN
I have done it with Garmins using SD card. Very straightforward - just followed instructions and everything worked as it should. I had to do it to recognize a newer transducer. I probably wouldn't do it mid-season unless necessary just in case you have issues - seems like a good item to check off when you take the boat out in spring.
Fishysam
Posted 5/13/2021 8:43 AM (#979842 - in reply to #979740)
Subject: Re: Update software?




Posts: 1209


I only updated when I had an issue that would be resolved by the update or a feature I desired was added. Why update to simply update. If you have no issues why ask for them?
OH Musky
Posted 6/13/2021 6:17 AM (#980591 - in reply to #979740)
Subject: Re: Update software?




Posts: 359


Location: SW Ohio
Some updates are worth the trouble but others cause more issues than they fix. Especially on Humminbirds. Seems as though the updates aren't checked for other issues they cause before they are released. There's a good website with lots of info on updates. The brands have their own forum and the update info is usually listed at the top. I always check here to see if there area any downsides before I do any update. Some updates have bricked head units that require them to be sent back to the factory. http://www.bbcboards.net/forum.php
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)