Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> lund tyee 1850 gran sport trolling motor
 
Reply New post
Message Subject: lund tyee 1850 gran sport trolling motor
RyanJoz
Posted 7/18/2018 7:42 AM (#912594)
Subject: lund tyee 1850 gran sport trolling motor




Posts: 1675


Location: Mt. Zion, IL
A buddy of mine just bought one of these boats for a heck of a deal and it came with a 12v 48 lb thrust trolling motor. We know this is not enough, but is 80 lb what most of you run on these boats? He understands that 112 would be better in high winds, but is 80 lb enough for most days?

Terrova with ipilot is the motor in question. 80 lb or 112 lb.
60" shaft long enough for these boats?
todd_yester
Posted 7/21/2018 11:47 PM (#912976 - in reply to #912594)
Subject: RE: lund tyee 1850 gran sport trolling motor




Posts: 148


Location: pittsburgh, pa
I bought a starcraft superfishermen 186 a few years back and started with a 80lb 60in shaft terrova. While it did ok around home in fairly calm conditions if the wind started blowing it would pop out every so often and had to run it on a higher speed going into then wind. I used it the first year to get by then bought the 112 with 72" shaft. Much better. With a deeper v aluminum boat like ours once you get into some waves the bow likes to bounce up so in my opinion the 72" shaft is needed and you might as well get the 112lb thrust cause you can run on a lower speed and the batteries last alot longer. Best choice i made was going to the 112 72in.
pklingen
Posted 7/22/2018 10:24 AM (#912987 - in reply to #912594)
Subject: Re: lund tyee 1850 gran sport trolling motor




Posts: 858


Location: NE Ohio
^^^^^^^ x2. i have a lund 1875 impact that sits quite a bit lower than the tyee and i have the 60" 80#. i wouldn't want anything less. i would fear this motor on your rig, with higher sides and heavier boat. good luck.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)