Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> motor support
 
Reply New post
Message Subject: motor support
pizer20
Posted 1/27/2020 4:52 AM (#953056)
Subject: motor support




Posts: 13


Just wondering what everyone uses to support motor when trailerig? I just got new Mercury 150and was looking for ideas Thanks in advance
DWags
Posted 1/27/2020 5:44 AM (#953057 - in reply to #953056)
Subject: Re: motor support




Posts: 53


Check out Mean Mounts
mikie
Posted 1/27/2020 9:24 AM (#953063 - in reply to #953056)
Subject: Re: motor support





Location: Athens, Ohio
I used one of these on my 225 ProMax for several years.

Swivl-Eze Lock 'N Stow Motor Stabilizer Lock - Model 10108

Expect, now, a discussion about which is better: a support ("transom saver") that anchors the lower unit to the trailer, or one of these locks which lets he LU hang free, locking the motor in closer to the transom.
Popcorn, pls! m


RLSea
Posted 1/27/2020 6:00 PM (#953122 - in reply to #953056)
Subject: Re: motor support




Posts: 479


Location: Northern Illinois
LOL! mikie you are absolutely right! As for me I'm in this camp:

https://www.amazon.com/Yamaha-MAR-MTSPT-YM-10-RAM-TILT-MARMTSPTYM10/...

BTW I have a Merc 150 Verado and use one support even though there is room for 2 on the advice of the dealer. I've had no issues.

Edited by RLSea 1/27/2020 6:04 PM
Windy City
Posted 1/27/2020 6:51 PM (#953125 - in reply to #953056)
Subject: RE: motor support




Posts: 93


Search M-Y Wedge.com, $40.00.

$240.00 for a Mean Mount, really?
VMS
Posted 1/28/2020 7:14 AM (#953135 - in reply to #953056)
Subject: Re: motor support





Posts: 3467


Location: Elk River, Minnesota
Hiya,

Much of this can be somewhat dependent on boat manufacturer as well, so it is something to consider when selecting a transom support.

If you have an aluminum boat, most (if my memory serves me correctly) will recommend using a transom support that ties directly to the trailer as this will stop any sort of flex on the transom itself when boat is being towed. Some will argue this doesn't happen, and some will. The boats are built strong enough to withstand a good bouncing (just watch your motor sometime as you travel down the lake in waves). The big thing is, when you tilt the motor though, the lower unit is now away from the transom and that enhances the amount of bounce the motor can have on the road. Taking that vibration and stabilizing it at the trailer keeps it from happening.

On many fiberglass boats, the transoms are built with extensive support from the transom forward, but still benefit from the same stabilization. Many of these, though, one can get away with the wedge-style as the transom area is much much smaller for the main motor, so flexing is reduced significantly (a way to think about it....take a 2" x 10" x 7 ft and stand on it between two supports at the end, then support it in the middle separated by about 2 feet.)

No matter what you choose to use, stabilizing is a good thing...anything that locks the tilted lower unit down is better than nothing at all.

If you are in the twin cities area, I have a trailer stabilizer I no longer need. It goes over a back roller, then up to the lower unit. It's yours if you want it.... PM if interested.

Steve

Edited by VMS 1/28/2020 7:15 AM
pizer20
Posted 1/28/2020 3:54 PM (#953169 - in reply to #953056)
Subject: Re: motor support




Posts: 13


I appreciate the offer but unfortunately I am in SW Pa
I should have said that i have a 1875 pro v bass on a shorelander bunk trailer
My old boat had a roller at the back of trailer to attatch motor support, this one does not.
Does some one make a support bracket the attaches to trailer frame?
Thanks everyone for the help
pklingen
Posted 1/28/2020 5:30 PM (#953176 - in reply to #953056)
Subject: Re: motor support




Posts: 858


Location: NE Ohio
i use the M-Y WEDGE on my merc 150 4 stoke on a lund 1875 impact tin boat and a lund shorelander trailer. i trailer 5/7 per week 7 months out of the year. roads are normal paved roads and not gravel. have had 0 problems in 3 years of having the boat.
VMS
Posted 1/28/2020 5:48 PM (#953177 - in reply to #953056)
Subject: Re: motor support





Posts: 3467


Location: Elk River, Minnesota
Hiya,

Cabelas does not seem to have this model anymore, but amazon does.

https://www.amazon.com/Extreme-Max-3001-1068-Adjustable-Universal/dp...

This is the model I used on my shoreland'r trailers. It attaches using the single bolt that holds the rear pad on the trailer in the center. This is a good heavy duty bracket and is highly adjustable.

Steve
RLSea
Posted 1/28/2020 8:24 PM (#953183 - in reply to #953056)
Subject: Re: motor support




Posts: 479


Location: Northern Illinois
Wedges that center the motor and keep it from turning right or left during travel on the trailer are important too. Balance is the key. Whether you use a wedge in the ram or a support that hooks to the trailer, balance the weight of the motor over the transom by tilting it so that its force is focused straight down on the transom.
FishHateMe
Posted 1/29/2020 7:13 AM (#953186 - in reply to #953056)
Subject: Re: motor support




Posts: 197


Location: Downers Grove, IL
I also use MY Wedge to support 200HP Merc on my 2025 Impact, as well as those heavy duty rubber sleeve things that fit over each side of the stainless steel shafts on the hydraulic steering; to keep the motor centered while trailering. Zero issues.
vegas492
Posted 1/29/2020 8:26 AM (#953188 - in reply to #953056)
Subject: Re: motor support




Posts: 1023


I use the Swivel EZE. They make different models to fit different engines.
Mine holds a 225 Optimax. The thing I like about Swivel EZE is that it is very easy to put on and get off, and it keeps the motor from moving while towing.
I had a wedge that I used, but getting those brackets in place to keep it from moving left or right was kind of a pain in the rear.
https://www.westmarine.com/attwood--swivl-eze-lock-n-stow-motor-supp...
musky513
Posted 1/29/2020 10:25 AM (#953191 - in reply to #953056)
Subject: Re: motor support




Posts: 521


You could always go the redneck route of a piece of 2x4 between the motor and the bracket and trim down until it’s tight...
Fishysam
Posted 1/29/2020 1:32 PM (#953199 - in reply to #953056)
Subject: Re: motor support




Posts: 1209


Extreme max from Amazon find the model you need.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)