|
|
Location: Eastern Ontario | Where do you find the diameter and pitch on Suzuki props. I cant find any numbers that would indicate diameter and pitch. ( 2004 70 HP 4 stroke aluminum prop )
Edited by horsehunter 8/4/2014 5:01 PM
|
|
| |
|
Posts: 518
Location: Cave Run Lake KY. | on my 2006 - 140hp. Suzy the diameter and pitch is stamped on the inside edge of my stainless steel props. should be same for the aluminum prop. |
|
| |
|
Location: Eastern Ontario | The only numbers I find are 21994 on one side of hub and H1068 on the other also MADE IN JAPAN so unless I have to take off the prop and look on the back of hub. Problem is boat is at cottage and I'm at home. |
|
| |
|
Posts: 437
| If should be stamped and visible right on the outside of the hub. Those numbers do not sound like they are a Suzuki number. Are you sure its a Suzuki prop? |
|
| |
|
Location: Eastern Ontario | I guess I will bring the boat home next weekend and take it to a prop shop and see if they have a way to measure the pitch. |
|
| |
|
Posts: 32934
Location: Rhinelander, Wisconsin | Pull the prop off and look at the hub on the inside, there should be numbers stamped in there. |
|
| |
|
Location: Eastern Ontario | Thanks Steve that's something I suspected but with my daughter and granddaughters the only ones at the cottage I didn't want to ask her to remove the prop. I will pull it when I go up on the weekend.
I also need a bit of sympathy the muskies are hot here at home and my boat is 2 hours away on a bass and trout lake. |
|
| |
Suzuki Props