|
|
Posts: 160
| I need a quick release that is at least 21 inches long or something that can slide out to clear boat. Any ideas? I need it for a power drive.even some type of plastic plate that I can mount to the boat then mount the motor out on the plate.
Edited by esox4130 3/12/2014 5:41 PM
Attachments
----------------
 image.jpg (134KB - 153 downloads)
image.jpg (88KB - 158 downloads)
|
|
| |
|
Posts: 1638
Location: Minnesota | if you have a machine shop around your home you can have a custom one built just a thought |
|
| |
|
Posts: 163
Location: NoDak | i feel that my terova on MKA-16-02 would clear that but if it woudnt any metal yard could sell you something like 3/8 aluminum plate that you could streach out a bit.
the mount is on the back end of my terova, if i find a tape measure ill let you know more, id just get the mount you want and you will figure it out from there
mounts for sale- http://mk.factoryoutletstore.com/cat/20885/Minn-Kota-Quick-Release-... |
|
| |
|
Posts: 347
Location: eagle river,wis | trying to mount one on an allison boat? |
|
| |
|
Posts: 279
Location: Central Wisconsin | On my Jon boat, I mounted my motor to a 1/4" piece of aluminum diamond plate slightly wider than the base of the trolling motor and then I was able to offset the removable section of the quick release and still use the existing holes for the stationary part of the quick release. I'd attach a pic but it's buried in storage. |
|
| |
|
Posts: 160
| Thanks for the input. I was thinking the machine shop route to just didn't know if anything was already out there. Yes it's on a allison xb2003 |
|
| |
|
Posts: 347
Location: eagle river,wis | I used a MKA32 with a genesis trolling motor on my Allison and it worked fine. |
|
| |
|
Posts: 307
| Put two regular quick releases together. Cheaper than machine shop. |
|
| |
|
Location: Eastern Ontario | There is an adapter plate that allows use of the existing cable drive mounting holes and the MKA-21 bracket with a Terova. |
|
| |
