Custom Leaders
MuskieFever
Posted 7/9/2013 2:59 PM (#650641)
Subject: Custom Leaders




Posts: 572


Location: Maplewood, MN
I've been going back and forth a lot recently with what style leaders I use. So my question is, what leader do you use? Do you make your own? If so, do you tie direct to the line or use a swivel, etc...
lpeitso
Posted 7/9/2013 3:11 PM (#650643 - in reply to #650641)
Subject: Re: Custom Leaders




Posts: 633


I buy some from Thorne's, but I have also made my own 7 strand leaders. I like the Nylon coated wire instead of regular 7 strand. I like the Stringease Stay-Lok Snaps, and the Dual rotating Ball Bearing swivels from Thorne's. For Jerkbait's I have used the O-ring, and 174# Piano wire. I think for some Larger baits I am going to just use Split Rings instead of snaps.

Lance
simple minded
Posted 7/9/2013 5:30 PM (#650663 - in reply to #650641)
Subject: RE: Custom Leaders


SS wire, stringease snaps, ball bearing swivels

I've built and used a lot of leaders with all the usual kinds of material and hardware but I"m back to the basics and keeping it real simple:

casting big weagles -- 8" cowgirl wire -- #4.5 stringease snap shrink tubed to one end, line tied direct to loop at other end

casting almost everything else -- 10" cowgirl wire, #4.5 stringease snap one end, ball bearing swivel other end

casting dainty stuff (eg 6" Jake, Long A) -- 10" 0.029 wire, #4 stringease, bb swivels




MuskieFever
Posted 7/9/2013 8:45 PM (#650704 - in reply to #650641)
Subject: Re: Custom Leaders




Posts: 572


Location: Maplewood, MN
Any pictures? I've been trying the hybrid leader system but so far haven't set the hook yet. It looks good but I might take it off because the uni to uni makes me nervous.
Guest
Posted 7/9/2013 9:47 PM (#650715 - in reply to #650641)
Subject: RE: Custom Leaders


here is my no1 leader,really tuff and price is right

http://huskiemuskie.ca/?page_id=5
simple minded
Posted 7/9/2013 10:14 PM (#650721 - in reply to #650641)
Subject: RE: Custom Leaders


pretty much similar to the "stainless steel jerk bait leaders" Guest makes. Check out his link, they look topnotch.
PIKEMASTER
Posted 7/10/2013 8:43 AM (#650771 - in reply to #650641)
Subject: Re: Custom Leaders





Location: Latitude 41.3016 Longitude 88.6160
Call John from Stealth Tackle 708 466 5066 he can make whatever U are looking for. Most Guides use his leaders they are some of the best.
mtcook16
Posted 7/10/2013 9:32 AM (#650781 - in reply to #650641)
Subject: Re: Custom Leaders





Posts: 546


Location: MN
I started to make some of my own with 49 strand wire. It's a 7x7 weave that is very flexible and hardly kinks at all. For jerkbaits and gliders I run a straight, single-strand wire leader without a swivel on the front. I found that the swivel inhibits the bait's action otherwise.

http://www.cabelas.com/product/American-Fishing-Wire-Strand-x-Leade...
edalz
Posted 7/10/2013 3:06 PM (#650867 - in reply to #650771)
Subject: Re: Custom Leaders





Posts: 458


PIKEMASTER - 7/10/2013 8:43 AM

Call John from Stealth Tackle 708 466 5066 he can make whatever U are looking for. Most Guides use his leaders they are some of the best.


I only use Stealth leaders and John does great work.