Posts: 633
Location: Madison, WI | I have a 24v Marineco plug that was previously wired with two sets of leads. one from each battery (A+A-, B+B-). The 24 volts was made with a jumper in the male end of the plug. one of the leads was faulty so i re-wired the 2 batteries to 24 volts and ran only one set of leads back to the bow. My question is can i still use this plug? If so do I just hook the leads to one set of terminals or what? (A+A-) for instance. Or will the jumper inside the male end ruin anything? |
trolling motor plug