|
|
Posts: 1184
Location: Iowa Great Lakes | Added a 2nd unit and havin issues getting them networked, I'm sure I'm missing some simple setting just no idea what....Both are gen 1 HDS trying to run both off 1 ducer..... |
|
| |
|
Posts: 2323
Location: Stevens Point, WI | Need to be more specific, what all pieces do you have and what all have you hooked up? What are you looking to accomplish? Are you just wanting to be able to share waypoints?
Edited by TJ DeVoe 8/3/2012 9:26 PM
|
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | Want to share waypoints and both units off 1 ducer, connected by an ethernet cable, units are a 5 and 7 |
|
| |
|
Posts: 2323
Location: Stevens Point, WI | It should be plug and play with the ethernet cable. Plug it in and you should be good. Do you have any other devices such as a LGC-4000 puck? It's just not working or what?
Edited by TJ DeVoe 8/3/2012 10:37 PM
|
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | Nothing but the 2 units and 1 skimmer ducer, havent been on the water with them yet but the new one is not reading temp. I know the new one works when hooked up to the console but wont read right when on the bow... |
|
| |
|
Posts: 2323
Location: Stevens Point, WI | In order to share waypoints, both units have to be turned on. You have to tell the unit to read the back unit. If I remember right, you have to go under menu, settings and system. You have to tell it which unit you want both units to read.
As for temp, do you have the temp overlay on the screen? If not, menu, page, edit data overlay. Find temp and add it to the screen.
Edited by TJ DeVoe 8/3/2012 10:53 PM
|
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | We had both on and did the auto configure or whatever it was in the network settings, will have to check on the overlay but pretty sure it worked when on the console...Will mess with it later after the storms let up.... |
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | Both work great on the console neither read the ducer on the bow.... |
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | Ok GPS is shared but still no ducer reading on the bow unit and console unit shows either no temp or 32.8 degrees....
|
|
| |
|
Posts: 1184
Location: Iowa Great Lakes | Got it figured out, simple setting set wrong on both units....
|
|
| |
Networking HDS