I need part for Okuma Convector Line Counter Reel.....
Rattlin RB
Posted 5/30/2012 12:01 PM (#562555)
Subject: I need part for Okuma Convector Line Counter Reel.....




Posts: 338


I lost the screw out of the lever that let's line out. Called Mike's Reel repair but they were closed. Any suggestions or contacts to get a new screw for the reel would be greatly appreciated!!! Thanks,
Rog
PIKEMASTER
Posted 5/30/2012 12:50 PM (#562569 - in reply to #562555)
Subject: RE: I need part for Okuma Convector Line Counter Reel.....





Location: Latitude 41.3016 Longitude 88.6160
Rattlin RB - 5/30/2012 12:01 PM

I lost the screw out of the lever that let's line out. Called Mike's Reel repair but they were closed. Any suggestions or contacts to get a new screw for the reel would be greatly appreciated!!! Thanks,
Rog

Okuma 1-909-923 2828, toll free 1-800-466 5862 ask for Parts Dept.
Rattlin RB
Posted 5/30/2012 8:55 PM (#562635 - in reply to #562555)
Subject: Re: I need part for Okuma Convector Line Counter Reel.....




Posts: 338


Thanks PIKEMASTER. Greatly appreciated!!!!
curleytail
Posted 5/30/2012 10:04 PM (#562642 - in reply to #562555)
Subject: Re: I need part for Okuma Convector Line Counter Reel.....




Posts: 2687


Location: Hayward, WI
You can also try to contact Mark Rogers. His screen name on here is California Musky. I know he used to check in here from time to time and he was always very helpful.

One way or another, I've been very happy with Okuma and their customer service and I'm sure they'll get you taken care of.
RiverMan
Posted 5/31/2012 9:17 AM (#562682 - in reply to #562555)
Subject: Re: I need part for Okuma Convector Line Counter Reel.....




Posts: 1504


Location: Oregon
Okuma has been very good to me............they will help you out. Contact Mark if you can.
Rattlin RB
Posted 5/31/2012 10:52 AM (#562694 - in reply to #562555)
Subject: Re: I need part for Okuma Convector Line Counter Reel.....




Posts: 338


Want to thank everyone for the replies and info. Got some back up screws ordered from Okuma today. I appreciate the info guys. Rog