PD vs. Terrova Mounting Holes
Rolex24
Posted 3/15/2011 6:55 PM (#487267)
Subject: PD vs. Terrova Mounting Holes




Posts: 86


Do the holes line up when going from a PDv2 to a Terrova?

Thanks in advance for any help. I searched but did not find.
fishcrazed
Posted 3/15/2011 7:48 PM (#487277 - in reply to #487267)
Subject: RE: PD vs. Terrova Mounting Holes




Posts: 171


Location: indiana		i went from a pd to terrova and bought the 40 dollar mount for the terrova and the holes did not line up. i cant say about the other mounts.
4reukmuskies
Posted 3/16/2011 8:38 AM (#487326 - in reply to #487267)
Subject: Re: PD vs. Terrova Mounting Holes





Posts: 422


I went from a power drive to a terrova and was able to use the same quick release mounting plate.
Rolex24
Posted 3/16/2011 9:01 AM (#487328 - in reply to #487326)
Subject: Re: PD vs. Terrova Mounting Holes




Posts: 86


My PD is hard mounted to the bow of my bass boat. I'd like to avoid drilling additional holes in my fiberglass. I just need to know if the bolt mounting patern/spacing is the same on both motors.

4reuk, did the bolt pattern line up on your quick release plate?
Jason Bomber
Posted 3/16/2011 9:12 AM (#487329 - in reply to #487267)
Subject: Re: PD vs. Terrova Mounting Holes





Posts: 574


Yes it will..
Just a few weeks ago I took a beyond outdated 42 lb PD off my boat........and the terrova went in those holes just fine..
Rolex24
Posted 3/16/2011 9:02 PM (#487449 - in reply to #487329)
Subject: Re: PD vs. Terrova Mounting Holes




Posts: 86


Jason Bomber - 3/16/2011 11:12 AM

Yes it will..
Just a few weeks ago I took a beyond outdated 42 lb PD off my boat........and the terrova went in those holes just fine..


That's great news. I plan on picking one up this spring. Thanks for the info.
4reukmuskies
Posted 3/16/2011 10:17 PM (#487462 - in reply to #487267)
Subject: Re: PD vs. Terrova Mounting Holes





Posts: 422


Rolex,

As far as I remember, yes the holes lined up but the plate was already mounted to the bow and I just had to mount the rails to the new terrova. I didn't have to removed the mounting plate that was already on the bow.

Edited by 4reukmuskies 3/16/2011 10:19 PM