X-190 Length
Guest
Posted 1/26/2011 3:12 PM (#477931)
Subject: X-190 Length


I was wondering if any out there knows how deep of a garage you need to store a X-190 w/o jacking it sideways?
What is the total length with the swing away hitch?
twells
Posted 1/26/2011 3:23 PM (#477933 - in reply to #477931)
Subject: RE: X-190 Length




Posts: 393


Location: Hopefully on the water		I can measure tonight and post later tonight or in the morning. with the tongue straight out and with it swung away.
MuskieMike
Posted 1/26/2011 3:44 PM (#477940 - in reply to #477931)
Subject: RE: X-190 Length





Location: Des Moines IA		http://walleye.outdoorsfirst.com/board/forums/thread-view.asp?tid=1...
lambeau
Posted 1/26/2011 6:09 PM (#477993 - in reply to #477931)
Subject: RE: X-190 Length


on a single-axel trailer it's 22' long with the motor down and trailer tongue to the side.
TJ DeVoe
Posted 1/26/2011 10:51 PM (#478049 - in reply to #477993)
Subject: Re: X-190 Length




Posts: 2323


Location: Stevens Point, WI		You need 23' with tongue swung back with a tandem trailer. The 23' gives you just enough to walk around the front of the boat with the tongue swung back.
twells
Posted 1/27/2011 11:48 AM (#478124 - in reply to #477931)
Subject: RE: X-190 Length




Posts: 393


Location: Hopefully on the water		With a single axel and the motor in the down position I need 22 1/2 feet. That is with the trolling motor sticking out a touch past the swing away tongue. with the tongue locked I need 25 feet.
Guest
Posted 2/1/2011 5:38 AM (#478996 - in reply to #477931)
Subject: RE: X-190 Length


Thanks for the information Guys, It will be helpful in deciding which model to go with.