|
|
Posts: 1453
Location: Kronenwetter, WI | So I've got a 200 evie and it started doing this weird deal last few times out....
In idle at Neutral...fine....put into idle speed forward and every 6-10 seconds the motor goes...THUMP...idle up to 10K rpms and it's smooth....run faster it's fine...back to idle speed forward.....THUMP.........THUMP......back to Neutral....fine....
I thought maybe the prop was loose so checked it after pull out and I can pull the prop backwards just a tad on the shaft...I'm going to re-tork the prop nut before going out again, but I doubt that's it.
Thoughts? |
|
| |
|
Posts: 32886
Location: Rhinelander, Wisconsin | Maybe the prop hub spline? |
|
| |
|
Posts: 1453
Location: Kronenwetter, WI | Thanks, Steve, I'll pull the prop and check the grooves. |
|
| |
|
| What year is it? It might be your powerhead. |
|
| |
|
Posts: 433
Location: Cedarburg, Wisconsin | Possibly a sensor malfunction feeding bad info to the computer. Take it to a dealer and have them read the error codes and see if something shows up. |
|
| |
Motor going...BUMP!