|
|
Posts: 42
| Does any one know the top speed of this boat? It is a 2005 with a envirude 225H.O. Is this a good hull seeing how they have changed it so many times?
Thank you,
glog |
|
| |
|
| Yes it is a good hull. The change was made in '06. As far as top speed I would guess mid to upper 50's. Not sure with the 225 but I bet its close. |
|
| |
|
Posts: 1
| Excellent hull...top end with a 225 51-53... I like mine lot..
Edited by Sondra 8/31/2010 7:11 PM
|
|
| |
|
Posts: 670
Location: Otsego, MN | I bet you can get high 50's to low 60's with that boat with the HO. |
|
| |
|
Posts: 42
| Looking to updrade from a 1998 690vs to this model. Wanted to see if this hull is similar to the 690vs. |
|
| |
|
| I have an 05 620 with a 225 Vmax, T-8 kicker. Fastest I've had it was 63-64 but boat was empty. My Vmax also has a Hydrotech phase kit installed (carbon fiber reeds/valves), supposed to add from 30-50 more hp. Don't know if it added that but it isn't bad. My boat was slightly slower than a friend with an 06 620 and a 250 XS racing motor on the back and the 2006 had the shallower, faster hull. I wouldn't trade the 05 for a newer faster hull anyday. It handles big water MUCH better than the newer hull. |
|
| |
|
| I think you have the best of both worlds. My buddy has the 05' 620 hull and I have a 06' 620 hull w/ 08 225hp E-Tec. I've been in his 05' many times and have to admit the hull handles big waves better than my 06'. Although both hulls are great and handle big water fine. You'll love the E-Tec as it's fast and quiet with little maitenance. I would guess you'll push over the 55mph mark with that outboard and hull. In my opinion you have a great combination and you can't go wrong. I love my E-Tec and 620. Go for it!!! |
|
| |
2005 ranger 620vs