|
|
Posts: 264
| Last week the water temp on my Lowrance is not showing up and is just flashing at 32 degrees. Any help or advice on this?
Thanks |
|
|
|
Posts: 218
| On my 520, lmx27 and lmx112 the 32 degrees happens when the unit displays temp but the temp probe is not being read by the unit. It seems that a reading of 32 is a default when the probe is faulty or not hooked up to the unit. It also happened when I tried to use an old gray connector plug temp probe and transducer with a newer blue plug unit. The transducer worked but the temp read 32. Maybe this helps...... |
|
|
|
| I'm in the same boat. My 522 stopped reading water temperature a couple weeks ago after having worked earlier this year. Slapped a new transducer on and still nothing. Soft/Hard resets, restore factory defaults= nothing. |
|
|
|
Posts: 28
| Are you guys using the transducer that shipped with the unit or a universal transducer in a trolling motor? Last year I couldn't get any readings on my transducer and found out there is a connector in the trolling motor head that must have vibrated loose. Put it together and it works great.
pmv
Edited by PMV 6/9/2010 8:40 PM
|
|
|