Using devcon syringe for Envirotex
muskyslayer96
Posted 1/21/2010 3:23 PM (#418624)
Subject: Using devcon syringe for Envirotex





Posts: 615


Location: Madison, WI		I have some Devcon 2 ton syringes (the kind you buy it in so you get exactlt the same amount of resin and hardner) Can I re-use them for Envirotex? It would speed up the envirotex process. If so what should I clean them with or do I need to?
Another question.....My basement fluctuated from about 63-66 degrees will envirotex set up at that temp or should i put a heat lamp on the wheel?

Thanks,

MS
Kenslures
Posted 1/21/2010 4:41 PM (#418643 - in reply to #418624)
Subject: Re: Using devcon syringe for Envirotex




Posts: 235


Hi MS96, I use disposable syringes that I bet from a veternarian. I think they are only $0.40 ea. and you can use them for a long time. If you don't know where to get some I will give you two of them when you get up this way. Still working on a day & time but I'll get back to you in a PM for a day & time to see if it works for you. Keep in touch. I wouldn't use an epoxy syringe but if you do make sure you clean them out real good before using them. Any questions email me. Ken