|
|
Posts: 425
| Will the Shack Attack "Curly Sue Spare Tails" fit fine on the Mag Dawgs and work as usual? Or is it either too big or too small? |
|
| |
|
Posts: 1243
Location: Musky Tackle Online, MN | Andy has several sizes. His mag size will work perfectly on them.
Aaron |
|
| |
|
Posts: 425
| Is that the 11" |
|
| |
|
Posts: 1243
Location: Musky Tackle Online, MN | Correct, 11" would be the size to use for the Mags.
Aaron |
|
| |
|
Posts: 288
Location: Montreal, Que. Canada | Aaron,
Do the Tyrant tails work for the mag dawgs or are they for the regulars?
David |
|
| |
|
Posts: 1243
Location: Musky Tackle Online, MN | David,
I'm really not sure on that. They're a different tail and don't have the cut thumper tail that a Bulldawg, Curly Sue or Super D has. But they can certainly be used as replacement tails for any of them. Instead of the cut tail they have the a tail similar to the Medussa, which has been proving to work very well. But because they're meant for the Tyrant, they have that notched portion that you would have to cut off and you will probably have to play around with them a bit more than you would on the Shack Attack replacements. But I would think they should work for either the regular or mag size.
Aaron |
|
| |
|
Posts: 164
| You could buy the biggest size I have and just cut them to size from the base of the spare tail etc. This way you can have any size tail you want, try a bigger tail than the standard tail.
here's a couple of baits that i have replaced the tails on using a soldering gun.
(curly_spare_tails_large.jpg)
(9inch_curly_repairedRS.jpg)
Attachments
----------------
 curly_spare_tails_large.jpg (120KB - 80 downloads)
9inch_curly_repairedRS.jpg (145KB - 91 downloads)
tails_9inchcurlyRS.jpg (148KB - 84 downloads)
|
|
| |
|
| I bought some Tyrant Tails this weekend at Gander Maple Grove. The tails worked great on the dawgs that I had to replace tails on. Just cut off the notch and glued it on. I also like the way each tail is tipped with a contrasting color. |
|
| |
