Lowrance Water Temp Question
Team Rhino
Posted 5/2/2009 10:44 PM (#375749)
Subject: Lowrance Water Temp Question




Posts: 512


Location: Appleton		I just took the boat out today and have an 28C HD unit on it. Question is I went to overlay data and went with water temp. When I did this all I could get was the screen to flash 32 degrees. I have a 520 C at the bow and that temp was working fine. Any help would be great. Thanks, Jeff
The Dogger
Posted 5/4/2009 7:21 AM (#375908 - in reply to #375749)
Subject: RE: Lowrance Water Temp Question




Posts: 215


Location: Twin Cities		When I have seen this in the past, the transducer didnt have temp capabilities. Might want to double check it. It seems that it defaults to 32 degrees when no temp is available. The best way to check this would be to swap units and see if if it stays the same at each spot, or if the 28 still reads 32 degrees at the bow.