|
|
Posts: 262
| Hey guys,
I looked back thru the archives and found a lot of discussions about who makes the best batteries and if the high end batteries are worth the money. here's my question, What makes a good deep cycle battery? If a guy was comparing them what would look for? Is it the amp hours or the reserve minutes? (could anyone tell me what those two terms actually mean). Anyway thanks in advance. I'm upgrading this year to a 24v system and I need new batteries.
cheers clay | |
| | |
Posts: 355
Location: Long Prairie, Minnesota | Here ya go:
Reserve capacity is the number of minutes a battery can maintain a useful voltage under a 25 ampere discharge. The higher the minute rating, the greater the battery's ability to run lights, pumps, inverters, and electronics for a longer period before recharging is necessary.
The most common battery rating is the AMP-HOUR RATING. This is a unit of measurement for battery capacity, obtained by multiplying a current flow in amperes by the time in hours of discharge. (Example: A battery which delivers 5 amperes for 20 hours delivers 5 amperes times 20 hours, or 100 ampere-hours.)
Manufacturers use different discharge periods to yield an different Amp-Hr. Rating for the same capacity batteries, therefore, the Amp-Hr. Rating has little significance unless qualified by the number of hours the battery is discharged. For this reason Amp-Hour Ratings are only a general method of evaluating a battery's capacity for selection purposes. The quality of internal components and technical construction within the battery will generate different desired characteristics without effecting its Amp-Hour Rating. For instance, there are 150 Amp-Hour batteries that will not support an electrical load overnight and if called upon to do so repetitively, will fail early in their life. Conversely, there are 150 Amp-Hour batteries that will operate an electrical load for several days before needing recharging and will do so for years. The following ratings must be examined in order to evaluate and select the proper battery for a specific application: COLD CRANKING AMPERAGE and RESERVE CAPACITY are ratings used by the industry to simplify battery selection
| |
| | |
Posts: 262
| thanks for the info | |
| | |
Posts: 561
Location: Monee, Illinois | Dekka batteries | |
| |
|
deep cycle batteries