Screw eyes
Ajohnson
Posted 1/19/2009 3:48 PM (#356038)
Subject: Screw eyes




Posts: 229


Does anyone know what size the screw eyes on the pos giant jackpots are? This is the site that Im looking to by them from if someone could just give me an idea of what size on this page are equivilent to the ones on a jackpot that would be great...http://www.upnorthoutdoors.com/stamina/plugs_hardware/screw_eyes.htm

Thanks!!
mikeallan257
Posted 1/20/2009 3:14 PM (#356238 - in reply to #356038)
Subject: RE: Screw eyes




Posts: 110


Location: North Canton, Ohio 44720		Those are the ones in the .072 diameter. I looked at one of mine and used a set of calipers on the screw eye to get the wire diameter. I do not know what length they use though. I would think they at least used the 1". They also make this same one in 1 1/4" and 1 1/2" length's and Rollies and Moores has them. I personally would lean toward the 1 1/4" at least for the nose and tail ones. Suicks and Reef hawgs use the 1 1/2" in this size. Hope this helps.