2003 evinrude 225hp
musky boys
Posted 1/9/2009 9:28 PM (#354174)
Subject: 2003 evinrude 225hp




Posts: 9


Thinking of buying one, The motor is pre e-tec any opinions. Thanks
mercmech
Posted 1/9/2009 9:40 PM (#354177 - in reply to #354174)
Subject: Re: 2003 evinrude 225hp




Posts: 49


Location: St. Croix River, Mille Lacs,		is it a ficht? if so ensure it has had the computer and injector updates. Be sure to do a compression check also
4amuskie
Posted 1/10/2009 9:17 AM (#354206 - in reply to #354177)
Subject: Re: 2003 evinrude 225hp




Those mostors are extremely reliable. All bugs were worked out and I know there are many satisfied owners. Value is lower because of prior problems.
esoxfly
Posted 1/12/2009 6:06 AM (#354451 - in reply to #354174)
Subject: Re: 2003 evinrude 225hp





Posts: 1663


Location: Kodiak, AK		Yeah, wasn't it like the '01's and before that had issues?
IAJustin
Posted 1/12/2009 12:50 PM (#354524 - in reply to #354174)
Subject: Re: 2003 evinrude 225hp




Posts: 2015


I have an 03 200hp FICHT and have had a few electrial issues. EMM/ECU failure is fairly common with FICHT's - keep this website handy www.dfitechnologies.com. Also they love to eat sparkplugs!!!! Make sure you replace plugs every year if you run much - Plugs are about $10 a pop and need to be "indexed" - I had a dealer show me how to do this the first time. (Sometimes it takes 7-8 plugs to get them all facing the injectors properly). On the bright side they are fast!
4amuskie
Posted 1/12/2009 5:55 PM (#354608 - in reply to #354524)
Subject: Re: 2003 evinrude 225hp




I had a FICHT '00 175 and replaced plugs maybe once. The indexing is not hard and if done right you wont go through anymore plugs than you need. Dont be afraid of it. They turned out to be great engines with less problems than the HPDI Yamaha and some OPtis.
esoxfly
Posted 1/12/2009 10:09 PM (#354659 - in reply to #354174)
Subject: RE: 2003 evinrude 225hp





Posts: 1663


Location: Kodiak, AK		And what problems have the HPDI's had?

Are you talking about the injectors?
Troyz.
Posted 1/13/2009 7:15 AM (#354685 - in reply to #354659)
Subject: RE: 2003 evinrude 225hp




Posts: 734


Location: Watertown, MN		Muskyboys, If it is a 03, is it a HO, it should not be a FICHT on the cover. I have been running mine for 4+ years no problems with the motor, except what I did.

Plug change every year or 2 years, just depends on the hours run, engine put alot of horsey's out, and burn down anode on the plugs. Mark gap opening and index gap opening toward injector, need torques wrench and few extra plugs, very easy process.

I have been told that this was probably there strongest motor as far peformance, 04,05 some minor bug with the E-tecs,

Troyz
IAJustin
Posted 1/13/2009 11:49 AM (#354746 - in reply to #354685)
Subject: Re: 2003 evinrude 225hp




Posts: 2015


Troyz your right - my boat it an 03 Ficht is 02...
4amuskie
Posted 1/13/2009 12:10 PM (#354751 - in reply to #354685)
Subject: RE: 2003 evinrude 225hp




Well documented 250 HPDI prob. as in lost powerhead. Just do search. Anyway I think the FICHT should not be a problem Good luck with it.