|
|

Posts: 114
Location: New London, Wisconsin | It looks like some cold weather is in store for next week which I'll be spending in Vilas Co. chasing muskys. My question pertains protecting my outboard. What steps should I be taking when pulling the boat out of the water? I trailer the boat to the lakes I like to fish so the boat is out of the water each night. In the past I have tilted the motor all the way down to drain and then pull the kill switch and turn the key a couple times to help clear the extra water. Is this enough? Any other suggestions?
Thanks
Labs | |
| | |
Posts: 2323
Location: Stevens Point, WI | I just drain the motor like you do and haven't had a problem. Only time I turn the key on is once I pull the boat for the very last time/ | |
| | |

Posts: 5874
| Labs - 10/22/2008 8:08 AM
It looks like some cold weather is in store for next week which I'll be spending in Vilas Co. chasing muskys. My question pertains protecting my outboard. What steps should I be taking when pulling the boat out of the water? I trailer the boat to the lakes I like to fish so the boat is out of the water each night. In the past I have tilted the motor all the way down to drain and then pull the kill switch and turn the key a couple times to help clear the extra water. Is this enough? Any other suggestions?
Thanks
Labs
Yes, that should be all you need to do. Plus, I would check the lower unit before then to make sure you have no water in it. Crack the drain plug enough to let some fluid out. If it's been sitting for a couple days, water, if any, will be on the bottom, and will come out first. If only lube starts coming out, tighten, and feel confident you are good to go. | |
| | |

Posts: 3513
Location: Elk River, Minnesota | When tilted down, the extra water will drain as stated. Any extra water that remains, which will be very little may freeze, but since it would have room to expand, it will not damage any components through the system. Tilt down, and you should be good to go.
Steve | |
| |
|