Hydraulics won't work.
Lightning
Posted 11/14/2006 3:46 PM (#220902)
Subject: Hydraulics won't work.


I replaced a relay and still getting a click where to look next.
jtroop
Posted 11/15/2006 5:37 PM (#221071 - in reply to #220902)
Subject: RE: Hydraulics won't work.




Posts: 177


Location: Cohasset, MN		Are you talking about your tilt/trim ?? If so - In my case it was a bad pump motor.
mercmech
Posted 11/19/2006 7:12 AM (#221633 - in reply to #220902)
Subject: RE: Hydraulics won't work.




Posts: 49


Location: St. Croix River, Mille Lacs,		PLease be more specific on your initial issue and other details. Perhaps some could help you
lightning
Posted 11/21/2006 9:58 AM (#221906 - in reply to #220902)
Subject: RE: Hydraulics won't work.


Sorry guys. The hydraulics are on the trim and tilt. The motor in an '86 150hp Envirude. I have lifted the motor after I loosened the hydralic cap.
Esox chaser
Posted 11/21/2006 12:11 PM (#221924 - in reply to #220902)
Subject: RE: Hydraulics won't work.




Posts: 154


Location: Appleton, WI		A lot of times there is an up relay and a down relay. I had a Cobra on a boat and the up and down relay were in a box with a fuse and you had to replace the whole thing when a relay went bad.