sworral-jigs
Bill
Posted 2/22/2006 5:52 AM (#178753)
Subject: sworral-jigs


I understand that you are the most knowledgeable to speak on jigs for muskies. I wonder if you could give me advice on getting started. Throwing big plugs and spinners that weigh 3 oz+ gets tiring real quick and I love grabbing a lighter outfit as a change of pace. I am going to concentrate on jigs and plastics exclusively this season and see if there is any difference in catch rates. (size vs #'s)
Thanks in advance
theedz155
Posted 2/22/2006 9:03 AM (#178808 - in reply to #178753)
Subject: RE: sworral-jigs





Posts: 1438


Remember muskie jigs do not have to be big. I know Steve's preference (and consequently mine too) is in the 3/8 to 1/2 oz size. Some of the "Musky Jigs" they sell out there are pushing an ounce or more.

The article is very good.

Scott

My outfit is a 7' MH Fig Rig with a Stradic 4000 spinning reel. I'm going back and forth between superline and mono in the 20lb range. Mono is much easier to see, you can feel a lot more with superline but I have a hard time seeing it. I use a 12" 65lb 7 strand leader with crane swivel on one end and a snap on the other. It's a pain, but I like to superglue my plastics to the jig so that they don't slide back on the hook. They will slide through the weeds a little easier and they also hold up a little longer too. (Just be careful in the carpeted boat with the superglue).

This should get you started.


Edited by theedz155 2/22/2006 9:09 AM
sworrall
Posted 2/22/2006 9:06 AM (#178809 - in reply to #178808)
Subject: RE: sworral-jigs





Posts: 32959


Location: Rhinelander, Wisconsin
If you have any questions after reading the article post them here. I'll do my best to answer them and hope many of the other jig pitchers here will, too.
Guest
Posted 2/22/2006 10:51 AM (#178827 - in reply to #178809)
Subject: RE: sworral-jigs


Great article. Do you recommend using a rubber skirt on the hook along with the plastic tail? I remember some in-fisherman articles by Doug Stange in which he suggests swimming the jig as opposed to what you are doing. Does that apply in different situations or is it just a matter of preference?
I was planning on using a heavy flipping stick as opposed to spinning gear. I don't get how it is harder on your wrists.
sworrall
Posted 2/22/2006 10:55 AM (#178828 - in reply to #178827)
Subject: RE: sworral-jigs





Posts: 32959


Location: Rhinelander, Wisconsin
I don't use a skirt on the jig, that slows it down on the fall too much. I also rarely swim the jig these days, especially since there are other soft plastics designed specifically for that like the Bull Dawg.