|
|
| a 1.5 pound 16" glder bait. i'll be needing to know.
HR Johnny, care to chime in on this one?
bikinibaitcompany.com |
|
| |
|
Location: Des Moines IA | Tuna Stick ........ Rated to 130 lb line ...... maybe something like this?
http://cgi.ebay.com/2-NEW-DAIWA-56-STAND-UP-RODS-50-130LB-TUNA-STIC...
Or have a custom rod builder build you a Super X Heavy????? |
|
| |
|
Posts: 743
| Lamiglas made a 6'10" Hughes Rivers Custom Jerbait rod...it's rated for HEAVY heavy lures
it's the GC6108....it's no longer made...BUT..they do make the the LGM 6108, but i have never seen it or used it. shop around/look around for this rod...it IS THE ROD you want for this application. this rod can handle this bait you have..plus it doesnt weight 15 pounds
Then, there are Lamigals E Glass Series..no longer made either..but they had had a few from 6 foot to 7 foot that could throw that bait too...i have one.
One guy suggestion buying a trolling rod like they use for Tuna..i highly recommend NOT doing not that...i'm guessing this guy never tried using a saltwater trolling rod for casting, or he would have never suggested it. those rods weight a ton and are NOT user friendly for casting..NOT.
whatever you get, dont get a rod that is rates for 1 oz lures to up 5 or 8 oz...get a rod that starts at 2 oz lures or or 3 oz or 4 oz lures and up..
if you look around for a while online and ask, you can find that Lamiglas HR rod..it will be used. i have not seen used the new LGM 6108 but lamiglas emailed me back and said it's the same blank..so that rod would work too.
YETI..get you a$$ back in the wood man.
tomcat
Edited by tomcat 11/16/2005 6:50 AM
|
|
| |
|
| 1.5 pounds is crazy-big especially for casting. I don't know if you will ever find a rod that will do the work for you with that load...just cut a foot off a normal jerkbait rod and lob away. A bigger question will be what kind of rope will you use to cast that monster--200#? The e-glass is pretty soft...if your super-bait works itself, that will be fine but if it requires any snap then you will want something stiffer. Go with lower-end graphite like the old premiers so there's some flex and durability.
Talk to Keith at Professional Edge--he sells mostly diamondback but has some low-modulous stuff, too and will build-to-suite: www.professionaledgefishingrods.com or call 612-802-4629.
Keith is a super nice guy and great to work with. Call him and he'll give you the straight scoop. |
|
| |
|
Posts: 3480
Location: Elk River, Minnesota | I've got a pretty straight 7' pool cue that I could whip up some line guides on...a little duct tape here, a little there...some more to hold the reel in place and you'd be all set.
You'd have the Red Green signature series rod...manufactured by brunswick-3M 
I don't know if you would ever be able to find a rod that would handle such weight... Good luck on your search though.. May you catch a monster with it!!
Steve |
|
| |
|
| DON'T BACKLASH!!!!
OH WAIT, WEAR SAFETY GOGGLES AND DON'T BACKLASH!!!! |
|
| |
|
Posts: 743
| " The e-glass is pretty soft..."
you cant bend my E Glass with a Mack truck..let alone a lure. i use it for suckers, casting 13" grannies, Pounder Dawgs, 10" Jakes...i'm sure they make different rods within the E Glass series..but i throw alot of big baits..more than most...as far as big bait rods go...an Extra Heavy E Glass has LOTS OF A$$ |
|
| |
|
| thanx fellas. at this point, i don't know what to do. i just dont know if i'd trust a rod rated for 2-10 or 2-8 ounces. i might contact keith and have a custom made. problem is, i'm a fairly tall guy, and under 7 ft rods just don't feel right to me, i'm clumsy enough, i need all the control i can get.
i dont usually bombcast, and have pretty good control over my casts in general. i don't cast over my shoulder, most times, i backhand cast/flip when i can get away with it. 80 spectron wont do it for this rod, probably some 120 or higher if i can find it. but thats not the issue.
by the way, anyone in the pittsburgh pa area need a partner during this lonely fall, im game. my boats in the repair shop, so im a$$ out until feb/march.
hit me up [email protected]
Edited by The Yeti 11/16/2005 11:22 PM
|
|
| |
|
Posts: 1316
Location: Madison, WI | Heck all you need to do is grab a normal rod and.... ....Move to spot you would have finished you cast>> put lure in the water>> open bail>>Turn trolling motor on>>Move in direction you would have started your cast from>>Stop boat> and work the lure in. I would never want a cast something that heavy... I love fishing, but that just doesn't sound enjoyable.
Edited by Magruter 11/17/2005 9:29 AM
|
|
| |
|
Posts: 181
| I made a glider similar in specs to that, I just use m 6'9" st. croix jerk and don't get carried away when casting. Haven't broke yet big baits rule I can get 4' and 5' glides out of mine. |
|
| |
|
Posts: 1504
Location: Oregon | The comments about heavy line are exactly right. I broke off a bait today that weighed more than a pound while testing it. I was using 65pd PowerPro, snapped it like thread on the cast. I have no idea why it broke either, didn't even seem to be a backlash of any kind. The other thing I notice while testing the big baits is that they take a major toll on the wrist and hand...and I am not a small guy. If I were looking for a set-up specifically for big baits I would look for:
1. A rod that is very heavy, no action at the tip at all, but not too short...maybe 7';
2. Something very light (talking about physical weight) because of the demand on your wrist and hand from throwing the beast. You don't want to be fighting a really heavy bait and a really heavy rod/reel combo at the same time;
3. Heavy line, minimum 120pd test...I would probably go heavier just to be safe, you don't want to lose that monster bait.
All of this said, I have had guys write me that throw these things all day long and love them!!
GT, if you want write me and I will provide you with the email of a guy that throws these on a regular basis for stripers, he can help I am sure.
Jed V.
Bikini Bait Co.
Edited by RiverMan 11/17/2005 11:34 PM
|
|
| |
|
Posts: 1316
Location: Madison, WI | I would think you'd want to stay away from superbraids and go with something with a thicker diameter. My understanding is thicker diameters absorb the shock of a backlash and just casting much better than supers. |
|
| |
|
Posts: 1504
Location: Oregon | GT,
I noticed today that the reason that big bait broke off was the line had wrapped on the worm gear on my Shimano Baitcast....snap.
The fella I told you about that fishes for stripers told me they run medium action salt-water rods. He said this about line: "We use the 80 with 8-12inch plugs, & 100/200 with plugs 13-23inches.And I nor none of my friends ever lost one".
Hope this helps.
Jed V.
BBC
Edited by RiverMan 11/18/2005 8:15 PM
|
|
| |
|
| Thanx Jed.
im goin to explore a few options. especially, i will be upping the lb test i use. i like the sound of that 135 spectra. we'll see what happens, gotta figure out what rod im goin to use first.
thanx again guys.
ps, Jed, i hope you got that bait back!!!
Edited by The Yeti 11/20/2005 12:50 AM
|
|
| |
What rod can throw