|
|
| i am looking to make a few crank baits and top water. i found some nice wood blanks
and have some questions for the hardware. for these lures should i use screw eyes and lure hangers
or thru wire? if thru wire is the best how does it work? can i use thru wire with the wood plugs?
any info would help thanks. | |
| | |
Location: Athens, Ohio | Mauser and I were working with some blanks, we drilled a hole in the wood, rolled the threads of the screw eye in some marine epoxy and screwed it in. Should hold forever. m | |
| | |
| thanks, ill have to check that out. the thru wire seems hard to do. | |
| | |
Location: Des Moines IA | We drilled the hole then put some epoxy in the hole with the end of a paper clip. Figured if you coated the screw eyes , the wood would gather up all the epoxy around the threads as they screwd into the wood , and wouldn't make it all the way into the hole. Either way should be fairly permanent. | |
| |
|
making lures