|
|
Posts: 267
Location: Right behind you (tap, tap) BOOO | When you guys apply envirotex to your lures after you paint them how do you keep it even on the bait. Can I just hang the bait and brush it on or do I need to keep a constant rotating motion to keep it all even and free from dripping.
Esox23 |
|
|
|
Posts: 333
Location: menasha wi 54952 | You can do it both ways. Rotation will allow you to apply a thick coat where the drip method is used for thin coats. Envirotex is heavy so you may need to experiment with each lure you apply it to. Have fun!!
MR |
|
|
|
Posts: 393
Location: Kawarthas, Ontario | If the bait has sharp edges (where flat mets flat) the ET will tend to thin out over these spots. You'll get a heavier build over round areas and areas adjacent to flat areas.
I've used both methods and I prefer a rotational system. |
|
|
|
Posts: 1937
Location: Black Creek, WI | I use a rotational method.... but it is limited to one lure at a time. Great for tinkering and getting once thick coat in a single application (like mreiter stated).
If you want to do many/several lures at once.... multiple coats via hanging and brushing seems to be the mainstay.
Good Luck.
jlong |
|
|
|
Posts: 2378
| When you hang the baits, are you flipping them every once in awhile? |
|
|
|
Posts: 393
Location: Kawarthas, Ontario | If you're hanging them, do one coat let it dry completely. Flip the bait over and do it again.
I have a rotational dryer that can accommodate about 8 lures at once. I'll try to post a pic later. |
|
|
|
| One other thing; If you get bubbles forming, try a blow drier. It lifts the air out of the ET.
Ty |
|
|
|
Posts: 393
Location: Kawarthas, Ontario | Okay, here's a pic with an unfished bait held in the dryer. I use a avriety of springs to hold the baits in place.
Attachments ---------------- dryer-1.jpg (9KB - 98 downloads) dryer-2.jpg (7KB - 106 downloads)
|
|
|