|
|
Posts: 228
Location: Tinley Park, IL | Anyone with a deep V running 2 units at their bow? I have Birds networked but am adding a Garmin unit this winter. Looking for mounting ideas. Any pictures would be appreciated. Looks like the Precision Sonar PMS mount is the way to go but looking for other suggestions. Thanks |
|
|
|
Posts: 102
| Did you look at the Bass Boat Technologies mounts?
https://www.bassboattech.com/ |
|
|
|
Posts: 12
| You can complete the shocker, if you put one in the stern
|
|
|
|
Posts: 228
Location: Tinley Park, IL |
I did thanks. I think this might be the best route to go with on my Balz-out.
https://www.precisionsonar.com/products/bow-mounting-systems/poor-ma... |
|
|
|
Posts: 217
| I use this mount on both my Ranger 1880 and my Ranger 619 FS. Works well with Lorance 12" HDS and a 10" Garmin and allows me to easily put the cover on without messing with the mounts. Get the smart brackets it make it easier to mount the units.
https://www.precisionsonar.com/products/bow-mounting-systems/side-by...
Edited by Abu7000 8/21/2021 8:55 AM
|
|
|
|
Posts: 368
Location: SW Ohio | I looked at the Precision Poor Man's mount but figured price was too high as it's only an angle. Went to the local Metal Store and picked up a piece of 3x3 aluminum angle, about 23" long, for $10. A little hacksaw and drill time later, I had both my Garmin and HB mounted with a Ram 2.25" mount. Works great, hold both steady in some heavy waves. The Garmin transducer is mounted on the TM, the HB is networked to the unit on the dash.
(65222845609__30C66529-A9CC-486A-BA6C-D0386C7FD947.jpg)
Attachments ---------------- 65222845609__30C66529-A9CC-486A-BA6C-D0386C7FD947.jpg (133KB - 231 downloads) IMG_2029.jpg (125KB - 235 downloads)
|
|
|
|
Posts: 1023
| I have two. A HB 8” and a 9” garmin. Both on RAM swing arm mounts side by side . Love it. |
|
|
|
Posts: 32803
Location: Rhinelander, Wisconsin | I have a Helix Mega 10 dedicated to a Mega 360 and a Helix Mega 7 on my 1625. Solid mount to the top deck on the 10 and 7 on a RAM on the front deck. Lots of room and easy to read. |
|
|
|
Posts: 540
Location: deephaven mn | OH Musky - 9/7/2021 4:08 PM
I looked at the Precision Poor Man's mount but figured price was too high as it's only an angle. Went to the local Metal Store and picked up a piece of 3x3 aluminum angle, about 23" long, for $10. A little hacksaw and drill time later, I had both my Garmin and HB mounted with a Ram 2.25" mount. Works great, hold both steady in some heavy waves. The Garmin transducer is mounted on the TM, the HB is networked to the unit on the dash.
Nice ! i like the simple doit your self application |
|
|
|
Posts: 116
| that is so badass! |
|
|