upgrading clips on standard board OR-30
25homes
Posted 6/27/2019 10:42 AM (#941410)
Subject: upgrading clips on standard board OR-30





Posts: 983


I use the offshore tackle boards just their standard board not the bigger ones. They work well but want to upgrade the clips. I got the new Red clips with pin in them easy to change no problem. I ordered OR-30 clips and they look great but they have the brass fitting in both holes on the clip and the screw that goes through the original orange clip wont fit through the OR-30 clip with the brass in it. Has any one done this? Did you just get a slightly smaller screw that will fit through the clip? Try and remove the brass fitting inside the whole? I know tons of ppl upgrade clips so just curious to best plan of action
Jerry Newman
Posted 6/27/2019 3:53 PM (#941430 - in reply to #941410)
Subject: RE: upgrading clips on standard board OR-30




Location: 31		I'd recommend a trip to the hardware store to get the smaller stainless steel bolts and nylon locking nut.
ToddM
Posted 6/27/2019 5:58 PM (#941435 - in reply to #941410)
Subject: Re: upgrading clips on standard board OR-30





Posts: 20219


Location: oswego, il		I bought the OR-18 latch clip and arms and put them on my church boards. I really like them.
Jerry Newman
Posted 6/27/2019 10:06 PM (#941440 - in reply to #941435)
Subject: Re: upgrading clips on standard board OR-30




Location: 31

Ya, I didn't like the clips that came with the large church boards, so I changed them out to the same clip configuration as the offshore boards.

 





Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(Boards- (1).jpg)



Attachments
----------------
Attachments Boards- (1).jpg (53KB - 422 downloads)