|
|
Posts: 3240
Location: Racine, Wi | Hey all, I'm FINALLY upgrading electronics on my boat this year. My question is, those of you with a Fish Hawk, where are you mounting your locator on the console? Trying to see if I can do a 7 or 9" locator and where to mount so it's not in the way of everything.
Pics of your set up would be awesome!
Thanks! |
|
| |
|
Posts: 833
| I just run a ram mount to get it above the steering wheel. Never really had any problems. |
|
| |
|
Posts: 3240
Location: Racine, Wi | Which locator are you using? |
|
| |
|
Posts: 1416
Location: oconomowoc, wi | joel.. i ran an hds8 on a ram mount on my old 1850 at the top of the dash. use a good backing plate underneath to mount the ball portion to dash. no problems with this set up. i don't have any pics for ya. contact ryan mcmahon maybe. he bought boat from me a few years back. chris |
|
| |
|
Posts: 3240
Location: Racine, Wi | That sounds good Chris. Hoping to only have this for one more season, but need to upgrade the electronics or I'm going to go nuts. |
|
| |
|
Posts: 166
Location: Gurnee, Illinois | Heavy duty Ram mount screwed to the top of the gunnel next to your dash. |
|
| |
|
Posts: 427
| Check Cisco fishing systems. They make several mounts that would work for you |
|
| |
|
Posts: 20219
Location: oswego, il | I have a mount on either side of my gauge panel. Use a ram if you want anything bigger than a 5" screen. I use one side for depth and the other for a map. |
|
| |
|
Posts: 1000
| I run a helix 9 off a RAM mount to the right of the gauges. Haven't had any issues. Could probably fit a 10 in there just fine. |
|
| |
|
Posts: 1023
| I do the same with an899 HB^^^^^ |
|
| |
|
Posts: 199
| tolle141 - 3/23/2018 12:34 PM
I run a helix 9 off a RAM mount to the right of the gauges. Haven't had any issues. Could probably fit a 10 in there just fine.
It's the same size. |
|
| |
Locator position on Crestliner Fish Hawk