|
|
Posts: 1405
Location: Detroit River | Has anyone had any experience with a 2001 Mercury OPITMAX 135hp? Any major issues with these motors? How reliable has it been for you? I'm going to be looking at a boat that has this motor & it supposedly has around 450 hours on it. Is there a way to verify the hours on the motor?
Thanks
|
|
| |
|
Posts: 1089
Location: Hayward, WI | A Mercury dealer can hook it up to a computer and check the hours. Might be worth having a dealer do a complete check through on it to make sure that there are no issues. |
|
| |
|
Posts: 665
Location: Twin Cities, MN | I will be starting year # 11 on my 2004 150 Optimax, and I have been very happy with mine. I had one small issue while under warranty, and also had the fuel pump go, but that was due to some crappy corn gas I put in on vacation one summer. No other issues for me to speak of.
The smaller 135-150's were not known for the same issues as some people had with the bigger engines when they first came out The key is to let it warm up to the correct temp before putting the hammer down, especially when running in cold water ( I fish until late November ) and never have had problems. I would suggest having a smart monitor/merc monitor if one does not come with it as nice to track your temp and RPM's.
Some people think they are noisey and do not like the growl, but I like it myself.
Like many things in life, if you take care of your engine, it will take care of you.
Good luck.
Pal |
|
| |
|
Posts: 327
Location: In the slop! | They are sensitive about low water pressure. Keep a fresh impeller in it, you won't have problems then. I have that exact motor bought new in 01. |
|
| |
|
Posts: 100
| I have a 2003 135 opti. Runs like a champ! |
|
| |
|
Posts: 1887
Location: syracuse indiana | I have a 98 opti 135 never have had a problem with it but impeller changes and the fuel pump issue as stated above but that was the previous owner didn't stabilize the gas |
|
| |
2001 Mercury OPITMAX 135hp?