|
|
Posts: 1516
| Had the boat out and graph flashed 60 ft all day. Did a dry run in driveway and it read 2 ft but no sound from transducer on the terrova. Has anyone had a transducer go out on a terrova? |
|
| |
|
Posts: 130
Location: Duluth, MN | I had similar issues with a Terrova I used to have. I never did figure out a solution. |
|
| |
|
Posts: 1095
Location: Hayward, WI | What depthfinder do you have hooked to it? |
|
| |
|
Posts: 325
Location: Otsego, MN | Here are a few things I have had to do on my Lowrances to get the Terrova to work...
I had to select the correct transducer on my LCX-112 and HDS unit.
My depth reading will cut out when the prop spins.
Adjust the sensitivity up and down to see if it will "find bottom". On Vermillion or shield lakes my sensitivity needs to be low due to the strong return signal, while weedy/muddy/soft bottom lakes I can turn it way up. |
|
| |
|
Posts: 1516
| It is hooked up to a LCX27 c. I have been using this same set up for several years no problem This year no depth readings. I'm going to try and find the transducer that came with the unit and see If I can get it to work with that if not I guess I'll figure the locator is bad. |
|
| |
|
Posts: 866
Location: NE Ohio | my buddy has had some issues with erroneous depth readings on his. it always finally starts working bit its like the transducer needs cleaned off or something. very strange. he's running a older birds. motor was new this year. |
|
| |
|
Posts: 7
| I've got a Humminbird hooked up to a Terrova and this spring my locator would lose depth when I turned the trolling motor on, it was a fuse in the head of the trolling motor. |
|
| |
|
Posts: 99
| Some info in here you could try.
http://www.nottsflyfishing.co.uk/pdf_docs/mkrepairs.pdf |
|
| |
|
Posts: 1516
| Thanks |
|
| |
Transducer issues on terrova us2