Electronics Set Up
gregk9
Posted 2/26/2016 11:44 PM (#807612)
Subject: Electronics Set Up





Posts: 791


Location: North Central IL USA
Pricing out a Lund Impact 1875 Sport and trying to figure out my electronics.

Here’s what I got:

1 Humminbird Helix 10 DI Sonar/GPS Combo mounted at the console center.

1 Humminbird Helix 12 SI Sonar/GPS Combo mounted at the console right.

1 Humminbird Helix 10 SI Sonar/GPS Combo at the bow.

All units will be networked.

The plan for the console is use the 10 for mapping and or sonar and the 12 for SI and DI.

2 questions - will the transducers for these two units interfere with each other?

Can I share the 12’s SI on the 10 while simultaneously watching DI on the 12 or vise versa?

kjgmh
Posted 2/27/2016 8:33 AM (#807626 - in reply to #807612)
Subject: Re: Electronics Set Up





Posts: 1088


Location: Hayward, WI
If they are networked you can use any transducer on any unit. There would be no need to have more than 2 transducers on the stern, a SI and a high speed. You also wouldn't need the DI on the 10 as you can use this off the 12. I also don't recommend a SI unit on the bow unless you know the limitations. SI works best going in a straight line between 2-6mph, which you are rarely doing running the trolling motor. What trolling motor are you planning on having on the bow?
gregk9
Posted 2/27/2016 10:20 AM (#807639 - in reply to #807612)
Subject: Re: Electronics Set Up





Posts: 791


Location: North Central IL USA
Yep, know about the bow mount SI limitations but the pros outweigh the cons. Yes, I could use the 12's signal to read DI on the 10 but simultaneously while looking at SI on the 12? I'm getting a Minnkota Terrova 80/US2/60 Ipilot Link
kjgmh
Posted 2/27/2016 10:50 AM (#807642 - in reply to #807639)
Subject: Re: Electronics Set Up





Posts: 1088


Location: Hayward, WI
From what I have read you can see the SI version of DI on the second unit.
ranger618
Posted 2/27/2016 11:26 AM (#807649 - in reply to #807612)
Subject: Re: Electronics Set Up




Posts: 106


Yes you can view si on the 10 and di on the 12 at the same time.
To avoid interference, set the si to 455 the di to 800 the 2d from one unit to 83 and the 2d from the other to 200.
tolle141
Posted 2/27/2016 8:11 PM (#807682 - in reply to #807612)
Subject: Re: Electronics Set Up





Posts: 1000


you said the pro's of a si on the bow outweigh the cons. could you elaborate further? genuinely curious because ive just always heard the opposite.

Thanks

Ben
Targa01
Posted 2/27/2016 8:40 PM (#807684 - in reply to #807612)
Subject: Re: Electronics Set Up





Posts: 742


Location: Grand Rapids MN
You can share SI and DI between graphs. So if you buy a 12 SI and just a 10 sonar/gps you can view SI/DI on the 10 by choosing the 12's transducer. Unless you wanted a separate source at the TM this would save you a little cash.

I just checked with HB to make sure I could view SI/DI on a Helix 9 sonar/gps when Ethernet connected to my 899SI and they said yes it can do that.
gregk9
Posted 2/28/2016 8:49 AM (#807709 - in reply to #807682)
Subject: Re: Electronics Set Up





Posts: 791


Location: North Central IL USA
tolle141 - 2/27/2016 8:11 PM

you said the pro's of a si on the bow outweigh the cons. could you elaborate further? genuinely curious because ive just always heard the opposite.

Thanks

Ben


http://texasfishingforum.com/forums/ubbthreads.php/topics/7218055/R...

https://youtu.be/kVSjjA074cE

https://youtu.be/vT8nArMGwPA
ESOX Maniac
Posted 2/29/2016 6:56 AM (#807815 - in reply to #807612)
Subject: RE: Electronics Set Up





Posts: 2753


Location: Mauston, Wisconsin
gregk9 - 2/26/2016 11:44 PM

Pricing out a Lund Impact 1875 Sport and trying to figure out my electronics.

Here’s what I got:

1 Humminbird Helix 10 DI Sonar/GPS Combo mounted at the console center.

1 Humminbird Helix 12 SI Sonar/GPS Combo mounted at the console right.

1 Humminbird Helix 10 SI Sonar/GPS Combo at the bow.

All units will be networked.

The plan for the console is use the 10 for mapping and or sonar and the 12 for SI and DI.

2 questions - will the transducers for these two units interfere with each other?

Can I share the 12’s SI on the 10 while simultaneously watching DI on the 12 or vise versa?



Yes, if the frequencies are same. But I wonder how much time you'll spend fishing. I removed my front sonar, it was to disttracting watching it, now i spend more time casting and focusing on my retrieve, etc. I just ask the guy who's on the back deck what's the depth or I can flip my HB SI around because I installed it on a RAM mount. I didn't have room for it on my console.

There's also HB forum page's - most are monitored by HB folks..post there & see what you get for responses. There's a lot more user's out there with setups like you are thinking about.

http://bb.sideimageforums.com/

and

http://forums.sideimagingsoft.com/index.php

and

http://forums.sideimagingsoft.com/index.php

and

https://www.in-depthoutdoors.com/community/forums/forum/fishing/toys...

and the HB FAQ page.

http://www.humminbird.com/support/faq/

Have fun!
Al






Edited by ESOX Maniac 2/29/2016 7:03 AM