|
|
Posts: 151
Location: Chippewa Falls, WI | I have a 1 yr old NACL 60 HS and the drag slips on it. I have it spooled with mono first and then 100lb suffix 832. I took the line down to the mono and watched the spool turn as I pulled on the line with my hand as the drag was locked all the way down. I'm not a mechanic, so I'm asking how I fix it? I have a trip to LOTW starting august 1st so I need it ready to go before I leave for that trip.
Thanks,
Aaron |
|
| |
|
Location: Hayward WI | Did you lube them reel recently? The drag washers probably have too much grease/oil on them. Take it apart and wipe them off. You could also order some Carbontex washers off ebay and replace the factory ones with them. |
|
| |
|
Posts: 251
| erico - 7/13/2015 9:03 AM
Did you lube them reel recently? The drag washers probably have too much grease/oil on them. Take it apart and wipe them off. You could also order some Carbontex washers off ebay and replace the factory ones with them.
^ +1, especially on the carbontex washers |
|
| |
|
Posts: 1283
| Also make sure the spring washers are on correct. I put mine back together wrong and the drag was slipping. |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | timhutson1 - 7/13/2015 11:09 AM
erico - 7/13/2015 9:03 AM
Did you lube them reel recently? The drag washers probably have too much grease/oil on them. Take it apart and wipe them off. You could also order some Carbontex washers off ebay and replace the factory ones with them.
^ +1, especially on the carbontex washers
if they have oil and grease on them just soak them in acetone and dry and reinstall. |
|
| |
NACL drag slipping